I used a wire wheel attachment for the drill and did the rack that the rear signals attach to. It seems to have done the trick.
All lights are functional now. Thanx!!
Search found 7 matches
- Sat Feb 20, 2010 6:05 pm
- Forum: Technical Help
- Topic: Rear Turn signals still not working
- Replies: 7
- Views: 2333
- Wed Feb 10, 2010 1:56 pm
- Forum: Technical Help
- Topic: Rear Turn signals still not working
- Replies: 7
- Views: 2333
Re: Rear Turn signals still not working
The lights are not LED.
On this spree the rear turn signals have only one wire going to them.
I put the meter on them and have continuity between the wire for the rear and where it connects to the front signal (the front have 2 wires).
On this spree the rear turn signals have only one wire going to them.
I put the meter on them and have continuity between the wire for the rear and where it connects to the front signal (the front have 2 wires).
- Sat Feb 06, 2010 11:37 am
- Forum: Technical Help
- Topic: Rear Turn signals still not working
- Replies: 7
- Views: 2333
Re: Rear Turn signals still not working
Thanx for the reply.
The bulbs are good as they light fine.
I traced the wires until they went into the conduit. Where do they originate from?
The bulbs are good as they light fine.
I traced the wires until they went into the conduit. Where do they originate from?
- Sat Feb 06, 2010 3:38 am
- Forum: Technical Help
- Topic: Rear Turn signals still not working
- Replies: 7
- Views: 2333
Rear Turn signals still not working
:*: I had no turn signals. I jumped the flasher and the front burned steady but the rear did not light. I installed the new flasher module from the auto parts store and the front flashers work just fine now. However, I am still not getting the rear turn signals to light at all. Where do the wires go...
- Sun Jan 31, 2010 1:39 am
- Forum: Technical Help
- Topic: Electrical help needed- no turn signals
- Replies: 12
- Views: 3596
Re: Electrical help needed- no turn signals
Sorry it took so long to get back... Bypassed the flasher relay module as suggested. I am now getting steady front signals. No signals in the back. gotta do some more diggin' to find the problem there. Where can I get a flasher module? Is there something I can get that is workable at an auto parts s...
- Fri Jan 22, 2010 11:02 pm
- Forum: Technical Help
- Topic: Electrical help needed- no turn signals
- Replies: 12
- Views: 3596
Re: Electrical help needed- no turn signals
I traced the wires and unplugged and plug them all back in making sure the connectors were all good and not corroded. None of the turn signals light at all. When I put a meter to them I am finding the female connectors only go up to around 150mv max once the switch is engaged for that respective sid...
- Sun Jan 17, 2010 1:46 pm
- Forum: Technical Help
- Topic: Electrical help needed- no turn signals
- Replies: 12
- Views: 3596
Electrical help needed- no turn signals
Running spree that starts every time. However the only light that works is the headlight. I have checked all the bulbs and they light fine. I do not have a manual and am not sure where to start looking. I can use a multimeter and have wrenching experience. I would like to get this fixed for my daugh...