Honda Spree and Elite 50 Forums

its a razz I have a 91 .. very reliable (doggy) scoot

I had an issue with a nc50 2speed 1982. the center hubs on my 78 and 80 expresses were smaller but they are nu50's. BUT i was able to have the rim respoked at my local bike shop. so I guess what I'm saying is they very in size but if the rim is not wacked the spokes can be replaced good luck . btw w...

Hi, not sure what type of paint you used but it looks nice. I have found the "protective enamel" holds up much better than standard spray paint on the metal parts

does anyone know of a good honda express forum? I have a 78 80 and now an 82

can I get more throttle by milling the throttle sleeve at the top? this would allow greater range. Is there a point that higher makes no diff or impede proper function. i have a few extra I might give it a try.

since i posted I found an sb50 intake WOOT and extenders the motor mount 3 inches I'm about 200 lbs and this made the bike much more stable putting me more to the center of the wheel base. I also made custom turn signal bracket for the front and used an elite back tail light setup . I'll post more p...

well she's about done, It's time to bring everyone up to date What we have here is a 1984 spree nq50 THE GREEN HORNET 34-35 mph he he he for now! http://i949.photobucket.com/albums/ad337/mkluvin84/green_hornet_logo.jpg getting decals made!!! http://i949.photobucket.com/albums/ad337/mkluvin84/th_IMG0...

Yep that's what I had done. only I used 4 - 1/2 inch holes on the top side, I thought about putting them on the back lip of the lid net to the original in let . I didnt have a uni bit. I bought a box of parts from craigs list and there was an intake that had been ground to a larger opening at the to...

I have the kit in and didn't see a lot of topend but a great increase in low touque and better up hill preformance..working on pulley mod and larger back tire. my spree is stock and has no mods other than the big bore and and the 95 jet from taz. oh yeah a few holes in the air box for the jet increase

well here's where I'm at, I'm using the 95 jet that came with the kit and it seems to be a pretty ok match. as I have a 65,68,78,85, and the 95. I tried them all I"m sure that 78-95 is the range that most spree's would fall into. As Bear say's "each bike is a bit different" I used thi...

inspect the port for the bystarter. and the bystarter its self. i believe it should read 10 ohms but you may wish to check the manual.

no cost inspection..

oh, get a new air filter. 4 $ at the local honda shop

your clutch and belt has a bit to do with low end. you can remove the side cover and check the belt for fraying. you can also remove the clutch drum with out to much trouble. look for wear on the pads. there are 3 arms with pads on them. they are held in by one spring each and pivot on one post each...

Well it might be common but if you can can find a honda shop that has one they list for over 150$ is there a better source? e- bay has a limited # ever posted and there's no way to really know if its a pos.

you go!!!!

does any one know if any other starters fit the nq 50 like the sa for example