Honda Spree and Elite 50 Forums

My blinker is very loud on my 86 Spree.......is that normal?

odinxxix wrote:thats the part number i see so it should be the correct one.
86 has 2 part numbers
16155-883-005 and 16155-168-681.

Well, maybe I have an 86........how can I tell off the VIN #?? Is that on the frame??

Well, my 87 Spree got put back together yesterday and it runs pretty nicely. I completely cleaned the carb/installed new carb gaskets and flushed the fuel and oil tanks and their filters.......put in a new spark plug and I was ready to crank it up. I tested the oil pump (before I rode it) and it out...

Thanks! I have the zip ties on them for now......I will hit Harbor Freight this week and see if they have a kit.

Well, I have a 1987 Honda Spree (NQ50). Ordered a new float seat since the carb leaks a little. Well, the new one I got is taller by about 1/2 than the original one.....wouldn't even fit under the float.

The part number I got was #16155-ZE5-005......is this the correct one?

Where can I get the small spring clamps to attach vacuum, fuel, oil lines? I have gone to numerous auto and lawn mower parts houses and they have nothing small enough? Do I have to goto a Honda dealer and pay $3.00 a clamp?

fightingplankton wrote:since it's a 2 stroke, putting anything other than 87 in it accomplishes nothing but you having less money.
there is actually a thread about this on here somewhere(i'm too lazy to find link for you though).

Yea, it is just stock.....I'll burn the 87 with some gas stabilizer. Thanks!

Got a 87 Spree......should I run the 93 octane instead of regular unleaded (87)??

I just got this bike and I am putting the carb back together on it's all cleaned with new float seat, o-rings and gaskets. Also got a new plug along with a new air filter. Looking forward to see it run like a top!

Going to get a battery for the Spree this weekend and looked at Batteries Plus here locally and I can get a XTAX4L-BS Xtreme Permaseal Battery [SB50 (All) Honda] for $31.00. I thought that was a pretty good deal with my contractor discount (normally $39.99)......plus I get a $5.00 rebate so I am goi...

I am cleaning the carb and all and was worried if the oil injection worked. I have no problem doing pre mix.....just don't want to screw something up with the oil not being dispensed properly.

I've seen some posts about chopping the plug......what does that mean? I am running a 1987 Spree and it has the NGK BPR6HSA plug. I'm not sure what the what the gap is supposed to be......so I was curious about what chop meant. Thanks!

How can I test to see of the carb is getting enough oil?

I just got a 1987 Honda Spree and the battery was not installed. I hooked it to a 12 volt jump box to see if I could get the electric start to work.....but no luck. Is the electric starter bad? Will it only work with a battery installed? How can I tell if the starter is working correctly? I am still...

Well, I am a new owner of a 1987 Honda Spree. Has less than 600 miles on it and has been sitting up for the past 6 years. Overall looks in great shape....little dirty but will clean up nicely. :coolcruise: Battery was missing and I might replace it later. Thought I would take it for a spin but could...