Honda Spree and Elite 50 Forums

Did you upjet the carb?? the restricted model used a #68 the unrestricted used #78. Also should add extra oil to fuel, about 1oz in tank if you are still using the pump. Thank you I will be ordering a new jet! What's the fuel mix after upjet if I do away with the oil pump and just mix in the tank?

Lighter weights and remove the restrictions. Do you know what the original rollers weigh? Just wondering so I know what's lighter, and what weight and brand do you recommend? I have already done away with the restrictor plate on the variator, and drilled out the exhaust pipe at the mounting bracket...

I'm looking to replace the roller weights in my 96' elite s variator- I'm not sure what size weights to get-or where to get them, I'm a 250 poound guy and would like a little better pickup and over all top speed! I would appreciate any advice! Thanks!!

Wow, nice find!!! You stole that thing!!!

I'm swapping the intake on my 86' spree to an elite intake- i know i need to install a barb for the oil line seeing as how the elite had the oil line running to the carberator, and the spree doesnt. my question is when I get the intake with a larger inner diameter installed the oxygen/fuel ratio wil...

The 2-puck is most likley from an sb50, the Elite E powerplant. If it's not, it looks just like one. do you think swapping these clutches would make any difference? or at least using the two arm clutch to expariment with the spring tention???? im thinking if i shorten the springs a little to make t...

spree clutch is on right, elite e clutch is on the left-

im wondering if swapping the three arm clutch in my spree to an elite e clutch(same diameter) with two clutch arms would make any difference? or at least using the two arm clutch to expariment with the spring tention???? im thinking if i shorten the springs a little to make the clutch enguage at a h...

The 2-puck is most likley from an sb50, the Elite E powerplant. If it's not, it looks just like one. do you think swapping these clutches would make any difference? or at least using the two arm clutch to expariment with the spring tention???? im thinking if i shorten the springs a little to make t...

So, what's that 2 arm from? :? im not sure what its from- the two arm clutch is on the left, and the standard spree clutch is on the right- any body else know or have any input??? the two clutches are virtualy the same except the difference in the ammount of arms on them-check the photos-any one ha...

another photo

photos of two arm clutch and three arm clutch-

WOW, what a steal!!!

odinxxix wrote:check e-bay canada

WILL DO!!!

agreed, air filter!! some mopeds are very tempremental!!