Honda Spree and Elite 50 Forums

ok thanks

mousewheels wrote:

87 se50p carp compatible with the 86 spree

No - SE50P carb (like the 85-87 Aero and 88-93 SA50) has the bystarter on the other side. Folks trying say there's interference with the shock.

thanks guys is the 87 se50p carp compatible with the 86 spree

are the 86 spree rims compatible with the sb50p

ya thats smart .. sounds like a plan .. thanks guys

Trafficjamz wrote:

eliteguy50 wrote:Shimming washers offer adjustability that a fixed sleeve cannot. If you machine it down to begin with, you wont have to machine it again if you didn't take enough off.

What he said

well why would i put washers back on why dont i just not shave it all off Drilling jets is not the recommended way to up jet your carb. Up jetting is not usually required if a milled head is the only change. Milling the head may require higher octane fuel. You should take a compression test to know ...

buy shim it up do you mean put the washers behind the pully .. and are you shure it will work on my sb50p with an se50p clutch ... and the only mod i have is i milled down the head 18 thou.. but that doesnt improve performence at all .. because i milled the head do i have to drill out the jet a bit ...

is any 1 famillar with the clutch mod .. im planning on doing it to my sb50p with an se50p clutch .. should i get 1k or 2k clutch springs and how much do i miil down the inner front pully p.s i have no other mods done to this bike

i got alot parts i need and im wondering werei can get them the cheapest ..spree and elite sb50p

when you check the spark you have to put it on metal ... clean the carb rly well iff you know what ur doing or do what bear says (go buy a new 1 there cheap) Dude Steve Austin is not that long ago... :geekdance: Sorry, wrong Steve Austin. Not what you're thinking, Stone Cold, but 6 Million Dollar Ma...

how is cleanig the spark plug a bad thing to clean it is nothing to get more life out of it .. spend that money on gas .. when ur tires get dirty do you go buy new ones cuz there cheap If your name is Steve Austin, you could. Plug socket and ratchet would be better if not. Steve Austin.................

ya but what im getting at is it doesnt take any thing to clean iit rly quick i tried kick starting but it was unsuccessfull I tried using the choke while kick starting and electric starting it.... NOTHING What choke are you using? so im guessing it either the STARTER spark plug or battery The batter...

wen your moped is broke and you cant drive it to the store to buy a plug it dont hurt to clean it to get batter spark Don't be cleaning spark plugs. Just replace the d*** thing. They are cheap. Your electric starter problem could be a number of things. Are you holding the brake on when trying to cra...

are you getting good spark.. is yous choke working I have a 1988 SB50 honda elite that runs and drives just fine when its running. The problem is that when the scooter is started for the first time (after a 4-5 days of not running) it can take up to 45 kicks to get it running. I thought it might be ...

first check to see if it has gas if it has gas in the tank check and se if it is getting gas to the carb.. if so and still not starting take the sprark plug out and clean it put it back in the coil and touck it to metal on the moped and kick it or push the starter buttom iff you see a little spark t...

ok i took .018 of my sb50p head and im hearing a couple thing i have to do some people on hear said i have to port the exaust so i dont blow up an i have to run higher octaine fuel.. i called vt cycles and they said dont port thr exaust that will make u lose the compession and they told me to up jet...