Honda Spree and Elite 50 Forums

ya i wana get 1 but i dont want problems wen i get it

SPREEtown wrote:on my spree the 3" conti zipp had clearance issues w/ the center stand and one of the exhaust mounting bolts. seems like they flare out quite a bit at the tread.

i have a sb50p and if i do pully mod by putting a se50p clutch in it and cutting the case will i need a longer belt and how much do i mill down the front inner pully

Bear45-70 wrote:The stock Spree belt is 24.7244" X 0.4488", so a 26" belt is only 1 1/4" bigger for the pulley mod.

ok i drilled out all the baffels on my sb50p and it goes 5mph slower what do i need to do about that


and im gona mill my head 20 thou and port the exaust.. after i do that if i dont run premix will my engine blow

what brand tire can i get that is 3.00 wide that wont rub what brand can any body sugjest for the 3.00 wide what is the biggest size tire i can get for the sb50p with out haveing rubbing issues. and do i get just the rear or bigger front and rear bigger rear tire at 2.75x10. the bigger front will in...

kk sory guys i just didnt no how good you guys are with replying now i do

martynkim wrote:yes they are now are you confused?

wel how do i measure it to know iff i can use it ... i also have an 87 se50b head will that work ya i was wondering because i have spree heads and 1 sb50p head and i wanna mill my head down but i wanna do it on a spree 1 if there the same so if i mess up i can just put the old 1 on I never said they...

and that much bigger will give me 2-3 mph ?

martynkim wrote:BACK ONLY 3X10 will do.

and for you to not help me and come on the post and say ur goin lumb cuz i have another post sain, the same thing thats not to cool eather

i think i have some 86 heads . would that work.. an ya sory if i have two of the same post im trieng to get the most answers i can so i dont screw something up sory if you dont like it but i want the most help posible and you guys no wat ur doing

if your ezaust its clogged i heard that to clean it put it in the oven and put the oven on clean

ya i was wondering because i have spree heads and 1 sb50p head and i wanna mill my head down but i wanna do it on a spree 1 if there the same so if i mess up i can just put the old 1 on They use the same gasket so it will physically fit, but it depends on the combustion chamber size will determine w...

what brand can any body sugjest for the 3.00 wide what is the biggest size tire i can get for the sb50p with out haveing rubbing issues. and do i get just the rear or bigger front and rear bigger rear tire at 2.75x10. the bigger front will increase ride quality a little and bring the speedo closer t...

i have a 89 sb50p and i was wondering is the cyl head the same as the sprees? thanks

i have a 89 sb50p and i was wondering is the cyl head the same as the sprees? thanks

i have a 89 sb50p and i was wondering is the cyl head the same as the sprees? thanks