Honda Spree and Elite 50 Forums

not sure what sizes your looking for but i found brass washers at a local ace hardware fit right in. thicknesses are limited though i believe i got a 1mm .5mm and they had 1.5mm there..

arnada wrote:currently running a 55pg bore. its pretty awesome except for heat issues at wot. but who rides at wot all the time? lol!!!

throttle? whats that? my scoots only has a on off switch!

Ah yes "four corner" piston scoring/seizure. Usually what causes a piston to get like that is improper warm up of the motor. Accelerating too fast when engine is cold causes piston to expand faster than the cylinder. Make sure your engine is good and warm before ripping on it. :thumbwink:...

only problem with vt is steve seems to disapear for a week or two from answering phones and email.. Keoni did all of the web page stuff hasnt been touched since he left, or even before that. steve carrys way more stuff than the page shows and almost all of his prices are cheaper then page shows. gre...

id deffinetly be interested in some probably like 5, can you do some different colors? such as white, black, yellow, and red kinda like stock colors of scoots, so you can do contrast to the color of your scoot. just a suggestion

Ebay,jiangwayne,scooter assassins. There is also a naraku brand bore you can get from scootertronics. how do you find the brands and specs for these kits? ive looked at all of these places ebay sellers dont list anything but the size bore (except daywott), jiangwayne was a ruima bore with a crappy ...

Yeah if you bore the 50 to a 51 your going to be fine. You can also look for a 48mm bore too. As ruima,yeah they were done a while ago. All the parts that's being sold or that was bought from them were left overs. Dio parts in general are going to be hard to get since these motors were last made in...

51 is already thin walled for stock stroke motors. I would ask Carlos(autotech355) and make sure its for a 41.4mm-44.1mm stroke. The 52 and up size pistons I know about is for 50mm cranks and up. thanks bakka, i never heard of the 52mm thats why i wanted to ask... i think ill just get a new kit for...

if you open the case up, some times you get lucky and when you are drilling the bolt threads out the back side..

ive been trying to source some over sized pistons for a few paper weights i have laying around in my garage. autotech said he can get me a 52mm piston for my 51mm bore.. ive never heard of this 52mm piston, does anyone know of this? or does anyone know if im gonna have to do case work to fit this la...

put some penetrating oil on there. center punch then start w/ 1/16th drill pit and work your way up next 1/8 so and so on till you can get the proper easy out in there.. use a SHORT WHRENCH with easy out, they are easy to break. try a thread chaser, if not got some heli coils and retap larger. red l...

did you do anything to the motor? bbk? take it apart? with its idle that rough can be anything rattling. it almost sounds like when my piston was to small for the bore..

theres a malossi for sale on site http://www.hondaspree.net/phpBB3/viewto ... =2&t=22043

anyone know anything about this pipe?? http://www.scooterpartsexpress.com/inde ... uct_id=167

ive used cheapo 669x18 belts that actually measured less than 17mm. i used a 1mm shim on the stock af16 boss and no shims on the kicker cover. i also used same belt with just the af16 boss, and it worked out just fine. belt just didnt drop in the vari all the way, so preventing the belt from riding ...