Honda Spree and Elite 50 Forums

Thanks guys. Helicoil set. Head torqued down to about 7.5 ft lb.

Thx bear

Thanks bear...guess someone had it screwed up. Helicoil it is.

Right,but the first few threads are gone. So will it hurt to go to 6 x 105. There is plenty good threads after first few.

Hello guys. I was taking my stock cylinder off when I saw the first few threads stayed in bolt. :crazy: :crazy: I am installing a 50mm BBK on it that uses stock headbolt. Should I take time to helicoil or just get a bolt a 1/4 to 3/8 inch longer just so I can get to good threads. There are plenty go...

Just got a 50 mm BBK. What are your carb suggestions? Anyone have one for sale?

Well I dont know what they are for...I know they dont fit my current scoot. If any knows what they are or are interested in them let me know. I would be willing to trade straight up as well for a couple 99101-187-0100 through 120 ?? Not sure the actual denominations. I did look them up and they look...

I came across these jets...99101-393-132 through 155. Any idea the application??

Thanks again guys...I am by know means a professional, I would say handy but no professional!! LOL. I think I will try some gasket remover first...let it sit over night and see how it looks or how easy itcomes off the next day. I have my old piston, head, and cylinder off now for sale on here and on...

Also I knew of areosol gasket removers. Could i spray the gasket and simply wipe it off with a rag??

As always thank you very much!

What do you guys recommend for base gasket removal? Any tricks?

All very good info as always wheelman...do you know of any pics of this restriction in the intake tract? Or maybe what exactly that restriction looks like?

Hi guys. Just bought a 96 Jog Next zone for 400 bucks in perfect condition. Im a bigger guy ...about 235, and this thing moves. It gets up to 40 in about 15 seconds and then on to 45 in about 7 or 8 more seconds. I guess my question is would this thing be restricted?? I pulled the variator off and i...

Does it matter how flat I get the washer? As long as there is a washer left? I might try the metal washer but while I got it cracked open might as well give the sanding a try. Thx guys!