Honda Spree and Elite 50 Forums

Thanks for the pointer Bear!

That's what I have been told too run with the stock Spump and stock carb and muffler. Plug chops are clean and power and top speed are great. I'm running a 110 main. What would your suggestion be Bear? I'm all for .more speed!

I run 32:1...for my setup seems to run good. I have a stock S oil pump tied open.

I'm running stock airbox on my BBK. I haVe a 110 jet and seems to be just about perfect. I would be scared to throw a pod on mine without going to a 115 or so. If you were only running a 90 or a 100 that was prob your problem. What kinda mixture were you running?

Hey Tru...ever have the same problem with trans cover??

Number 16 and 17 are def phillips. Everything from the outside shields to the trans cover uses Phillips pan head screws. Not saying I agree with it but thats what this Jog uses. 1996 jogg next zone cy50


http://www.cheapcycleparts.com/model_ye ... ies/220060

LOL...good point. Oh well whoever snags this will be getting a good deal.

If he responds to me today it sure as * will be!!! I just saw it about 10 minutes ago. I would buy this and sell my 94 S on here.

LOL...Glad Im not the only one that found that odd!!

Yeah i took it all back apart again...checked the bearings and gears since he about ran it dry and they were fine. So when i put back together i tightned extra hard. Its phillips head not hex like the elites to I turned as hard as i could with a screw driver. I hope when I put this new clutchbell on...

Hey guys I just replaced the final drive bearings on my buddies Yamaha Jogg. Everything went accordingly and put back together. He was driving it for about an hour the other day when he lost power and saw oil leaking on the road. He limped it over to my house and I saw the transmission screws had al...

I'm running a 110 jet with my stock carb and 50mm BBK. I had needle on bottom clip but that was to rich on takeoff. Now I run it on middle clip. I also run stock pipe and airbox.110 jet seems to be perfect.105 seemed a little lean.

Awesome display. Thx !

Does the needle setting. Only effect idle flow? Running BBK with stock carb and 110 main with needle on bottom groove. Nasty hesitation on takeoff then smooths out. Would raising needle help takeoff but hurt temp at wot?