Honda Spree and Elite 50 Forums

carb was gone thru twice everythings clean all jet all vent holes the more i run it it gets better each time it has been sitting awhile so i think till the carb and the oil injection run itll b fine thanks to all for your help dont usually work on these mainly dirt bikes thought it would be an intri...

changed o rings and vacuum line runs pretty good but bogs every now and then think it really needs run time

i understand how the feul system works with vacuum and all that is what seems to be the problem gonna get new o rings today and try it out thanks for the help

what you reccomend i do runs fine on stand but not under load

me either but 25 years old and never conditioned something gotta go and rubber is the worst thing for dry rot

is it possible to match the o rings up with a differant o ring from like harbor freight or something i believe that once i correct this problem i should be good to go

so the o ring in the carb goes to the flat side of the insulator and the o ring in the insulator goes to the intake flange

itll rev then bog rev then bog stays running on center stand anyone know where to get the two o rings for the carb and intake and when installing the gasket with the o ring does that go o ring to o ring with the carb

you mean the gasket between the carb and intake manifold and how does the bistarter come apart im new to this scooter thing actually working on this for a friend you dont think it has anything to do with the belt

im no bear at 159 stock air box isbeing used bike is all original 100% could the v belt need adjustment or conditioning if so how do i go about it thanks the cub haha

got everything running perfect but wont even pull me on the level has been sitting since last august anyone have an idea whats wrong

got it to start and run sounds perfect but wont pull me up the road and im only 160 lbs any suggestions

there is no vacuum to open the petcock but when i remove the air boot and cover the intake with my hand i regain vacuum and the bike will start

help i have an 86 spree it also is starving for fuel pulled the vacuum line and sucked and gas came out but installed it back on the manifold and tried to start it and i get no fuel to the carb anyone know what could be the problem