Search found 14 matches

by killingspree1985
Fri Apr 05, 2013 5:49 pm
Forum: Technical Help
Topic: Spree revs out on start up
Replies: 1
Views: 1181

Spree revs out on start up

So I just rebuilt a 1985 spree new rings and piston and put everything back together went to fire it up and she roared..... Except it just revs out! So I killed it and re adjusted the carb and it did the same thing....so then I thought it was in my throttle cable ...nothing looked out of the norm an...
by killingspree1985
Fri Apr 05, 2013 5:41 pm
Forum: General Discussion
Topic: Spree revs out on start up
Replies: 3
Views: 1777

Spree revs out on start up

So I just rebuilt a 1985 spree new rings and piston and put everything back together went to fire it up and she roared..... Except it just revs out! So I killed it and re adjusted the carb and it did the same thing....so then I thought it was in my throttle cable ...nothing looked out of the norm an...
by killingspree1985
Wed Aug 29, 2012 3:19 pm
Forum: Technical Help
Topic: 1985 nq50 and an 1987 donor bike
Replies: 1
Views: 1158

1985 nq50 and an 1987 donor bike

what parts should i swap from the 87 to the 85?
by killingspree1985
Sat Aug 25, 2012 5:29 pm
Forum: Performance Technical
Topic: ax24 belt and gear gasket
Replies: 3
Views: 1659

Re: ax24 belt and gear gasket

no i wanted to buy one at a time and see the results with each.Does it only work with a bbk or what? left carb alone as well
by killingspree1985
Sat Aug 25, 2012 10:40 am
Forum: Performance Technical
Topic: ax24 belt and gear gasket
Replies: 3
Views: 1659

ax24 belt and gear gasket

i installed an ax24 belt and it made my top end slower than the stock bando. why is this an upgrade? and i installed tazland gears and made a new gasket but its leaking.......where can i find a stock replacement??
by killingspree1985
Mon Aug 20, 2012 11:36 am
Forum: Performance Technical
Topic: big bore kit and gears?
Replies: 11
Views: 5234

Re: big bore kit and gears?

But if you look at the stock intake there are soo many restrictions..... with a little mill work i could open it up quite a bit. Or am i wasting my time as far as that goes? and my main problem is finding links for these upgrades.
by killingspree1985
Sat Aug 18, 2012 3:35 pm
Forum: Performance Technical
Topic: big bore kit and gears?
Replies: 11
Views: 5234

Re: big bore kit and gears?

Where can i get the upgrade for the reads and intake? mainly the reads because ill probably polish the intake and call that good.Also where can i find a kickstart assembly?
by killingspree1985
Tue Aug 14, 2012 8:50 pm
Forum: Performance Technical
Topic: big bore kit and gears?
Replies: 11
Views: 5234

Re: big bore kit and gears?

yup and i actually had it faster when i held her wide open for over 5 min on a long stretch or road but most the time just a hair over 30mph......any help on getting it faster? but not just faster is like to keep it reliable and i dont want to blow her up.... i mean she is an old girl. oh and it onl...
by killingspree1985
Tue Aug 14, 2012 6:05 pm
Forum: Performance Technical
Topic: big bore kit and gears?
Replies: 11
Views: 5234

big bore kit and gears?

my 1985 spree 50 runs great,but tops out at 30-32mph. Id like to make it go about 40mph without having to upgrade the carb. which big bore kit and what gears should i use? I weigh 165lbs if that matters.Also this spree is bone stock .....what else should i do to it to make sure it stays reliable? Sh...
by killingspree1985
Tue Apr 19, 2011 11:02 pm
Forum: Technical Help
Topic: spree starving for fuel
Replies: 9
Views: 3023

Re: spree starving for fuel

had this problem.....its the carb...... look at post spree wont go and click on the link bear posted and ur problem will be fixed..
by killingspree1985
Tue Apr 19, 2011 1:52 pm
Forum: Technical Help
Topic: 1985 spree carb problem????
Replies: 4
Views: 1912

Re: 1985 spree carb problem????

Lol killingspree all the way....btw how tight should the float screw be? Do you want it where the pin doesn't lift off the groove? Or so it has play but not sloppy?
by killingspree1985
Tue Apr 19, 2011 11:36 am
Forum: Technical Help
Topic: 1985 spree wont go!!!!!
Replies: 3
Views: 1647

Re: 1985 spree wont go!!!!!

Yes it is the honda spree for $350...and carb jets were plugged.... gonna wait for the next warm day see if that was my main problem.
by killingspree1985
Mon Apr 18, 2011 6:20 pm
Forum: Technical Help
Topic: 1985 spree carb problem????
Replies: 4
Views: 1912

1985 spree carb problem????

just got a 1985 spree with 471 miles.......its in great condition but its spewing gas out of the carb and it doesnt run right...bogs down and stalls out....cleaned carb multiple times checking and checking...the float has both the pin and the needle and moves smoothly.....starts right up but just is...
by killingspree1985
Mon Apr 18, 2011 12:22 pm
Forum: Technical Help
Topic: 1985 spree wont go!!!!!
Replies: 3
Views: 1647

1985 spree wont go!!!!!

Bought a 1985 spree and it needed a new petcock and battery......got both and she fired right up... took it for a ride and it went 25mph for 1/2 a second .....then its just bogged out...cleaned the plug got new gas and cleaned the carb and it repeated..... any ideas on why it wont go??? by the way i...