Honda Spree and Elite 50 Forums

I had the same issue last year with the same scoot. I cleaned the carb twice but come to find out the main jet kept getting a little piece of something in it. Make sure you can see a clear round hole through the main jet and also when idling spray some either around airbox and intake manifold to che...

I have an 01 honda elite sr50 and want some new wheels. Does anyone know if the monkey wheels found in like eBay 10in x2.5in will fit my scooter. Also what kind of hub ill need to make it work and where I can get one.

So I did a zx trans swap and all is well now I just need a polini for ruckus variator and a bigger drive face. I know where to get the variator but where do I get a drive face that's bigger then stock for more top end? Brand name and any other info would be great.

I appreciate the reply but I don't want to change weights or spring combo because my WOT rom is exactly where I want it. I need some way to hold a high rpm off the line so the pulleys don't shift right away. The torque driver I bought was supposed to help but it appears someone just made the toque d...

ill cut to the chase. 2001 elite sr with corsa, 21mm oko, ct mani, pg long, 9.8 gears ( I like to drag race soon comments about gears please), 1500 center, 2k grabbers, keli vari. I also have a ZX trans setup that I'm not happy with. The problem is this setup makes power at like 7k and up so I need ...

It's brand new. I need one with a steeper angle.

I def need one that's no question. Just wondering if anyone has experience with them and can suggest a good one.

So I just did zx trans swap on my 01 elite sr. I need to know where I can buy a different torque driver for the rear pulley. Please help. I need something meant for drag racing. If you know of anything let me know what, where, and how much please. Thank you

I have a tach and temp gauge and was only changing by 3 grams each time only goin up by about 200-300 rpm at a time and I still feel like overshooting 9200rpm hurts me. Which is why I explained it the way I did. Nevermind guys.

i am running 9.8 gears because I do a lot of drag racing with my friends and 55-60 is plenty fast for me on these tires. I have my 06 GSXR 1000 if I want to go faster. I also feel like if I go any lighter it loses power. In my experience my setup makes max power at about 9200 rpm which is right wher...

That will do the exact opposite of what I want. I think I need a steeper ramp to hold the weights down for longer so it doesn't shift so fast off the line. Anyone who know what ramp is steeper then stock? More for drag racing maybe....

Like post says I have an 01 slite sr with corsa, 21mm oko ct Mani, pg long, gears and some clutching with keli vari. I feel like I could use a vari and sef that's doesn't shift so fast out of the hole so it's holds higher ramp right as I accel. Any info would help. Basically when I run wot with my s...

Does anyone use a different needle on the 21mm oko?

k i tried a 40 pilot and it seems to be a little better, more tuning planned today. I'm running ngk b8hs

I have a 42 pilot that I just drilled out a little bit with step bits but it seems to have made it worse. Would changing my main jet effect anything with pilot circuit? I feel like I'm to rich down low and too lean up high. My idle temp is like 220f and if I'm WOT and let of te motor cools down quic...