Honda Spree and Elite 50 Forums

Checking with a other motor head and came up with another Spree brake light switch. Cleaned it up and put it in. Works like it should. What would you guys recommend for Mirrors? Do not have to be stock, just decent quality reasonable price. I'll have to look at the thread pitch to get correct ones. ...

OK thanks for the info so far!. I had some time and took out both switches. Got a little lucky in that the one that the plunger was broke was also the one that did not work. The other one I shot some contact cleaner in it and worked it, and works every time and under .5 ohm. The other one I took apa...

I picked up a rough 84 Spree for almost nothing and have been working on it. Got it running and will need a few more parts. Rear rack and Turn Signals and mirrors. But what I need now is a Brake light switch. I have one that needs the plunger. I think I can make that one work. The other one is dead....

Hey all, Have not posted in some time but have been lurking for awhile. Just picked up this 87 Spree this summer. Not running of corse. Sitting for years. All my stuff is old and broke. History,, 3000 miles No crank. Found the ignition switch bad replace with new one and it cranks good. Cleaned the ...

Marty, Looking for a late model flywheel fan, and a center stand with pin. Shipped to 48154. Thanks Brian

Today I pulled off the flywheel and stator put in the old stator and then tryed to put on the early flywheel and it would not seat all the way down on the taper?? :*: So I put the origonal late stator back on and the later flywheel and now need the later fan. Now I hope the fan housing are the same....

I am puting together an 86 Spree motor. I also have alot of parts from an 85. I was putting the flywheel on the 86 (late) and I noticed the 85 (early) was different?? I put on the late flywheel that was on that motor. Then I was going to put on the early fan because that is all I had and the bolt sp...

Thanks CBR on the tip of the gaskets. I also need to get crank seals I see he has them also. Any other seals I need to do the motor?? So the only main difference of the 84-5 and 86-7 is the kick starter?? My Spree says 1985 but the motor has a kicker on it so it may be a 86-7 motor. It also looks li...

Hello, :? newbe to this forum, but not new to repairing motors of all types. Just picked up this Spree 85 this spring. Mostly complete but needing work. This week I pulled the motor and drive and found it a mess. Sombody was in there and slaped it together because parts are missing ect. What I see i...