Honda Spree and Elite 50 Forums

nad also wheni pull the fuel line it just flkow out gas im pretty shure it shoudlnt be doing this. could it be flooding

and the onlyand wheni hit the back break it will die way it will idle is if the back wheel is spinnig. so whats casuing it to do this its not idling at the normal speed so whayt causes this

ok so my problem now is that it will idle but it will like speed up and slow down. it will idle like tht on the stand but when i get on it to go i have to have the back tire spinng. and then it will go then when i let off and hit the throttle agian it dies . i know its carb reALETED SO WHAT COULD IT...

i ordered mine from service honda.com the part number for the rings are 13010-gj-5015

people says its not hard but i went thru two sets a ring then finally got smart and took the piston off put the rings on thenput the piston in the jug ten i connected the piston to the rod and slid it down . thats how i would do it.

check the plug. i think that was the problem with mine.

well i havent checked it yet but im pretty shure thats not it because it ran the other day and i just rmnebered i had iot off and tried ot crank and it wouldnt soi dont nknow what to do. if you over tighten the reeds would that be a problem

can i take the muffeler off and check because i know the exhoust poort is clean thats the whole reasonim in this mess, but also if thts the case why did it run the other day, cuz it wouldnt get clogged tht quick would it?

i checked compression today it went all the way up to 150 but i did it aout 10 strokes so.

it has a brand new piston and before tht i cleaned everything. it mgiht be the exhuast butit ran jsut a couple a days a go then slowly died over the next few days the battery is dead but it ran with out one. im goning to change the spark and then ill see if it works but if you ovber tighten the inta...

well now that i finally have spark it wont run . it has about 130 punds of compression has spark, but im going to try a new spark plug because i accidently ran it lean because the air filrter tube fell off and didnt know it so if the new spark plug doesnt work im lost. ive tryed everything starter f...

id figure i would do tht but if the carb going to the intake thing if it had a little leak could tht be the problem

Well i just went ahead and drilled it and tapped it for the long run. And now im havin another probvlem the spree will not idle at all the screw is as far as it will go in and it just barrley idle and when i get it off the satnd it dies. when im driving im noticeng like condensation on the intake an...

Well i went and got some strated fluid after 30 mintues i got it to crank.But now it sams to run fine except the carb is stripped and its always coming looose which isnt real good becasue i barely have to touch the throttle at all i can ride up down hill with no hands the only reason i put my hands ...

Ok now i have another problem yesterday i could get it to crank after it truned over about 10 times now i cant even get it to crank. the compresion is 130, its getting spark, adn ive cleaned the i dont know how many times, ive been workin on it all day today and cant figure it out ive put gas in the...