Honda Spree and Elite 50 Forums

Will this do?
http://beedspeed.com/product_info.php?products_id=2211

Update: Engine has been removed, ripped apart, and awaiting parts. I went back to 9g and 10g weights, put a brand new polini belt on, new brakes, and cleaned everything up a little. I did a little reading and had a question. Should I double my head gasket during break in? Since I will be getting ano...

Best place to get an oil plug?

Malossi mhr bbk sorry I left that out.

As suggested in PM, I'm going to write down my plans and get some approval from the masses. Buying a new bbk. Using my malossi head. (Installed correctly) CT intake, 21mm oko, foam pod filter. Disabling the oil pump and going premix. (Don't know ratio yet) I'll be using the jet sizes recommended by ...

Well my carb is BRAND NEW, like only a couple hours on it. The old carb is still good its just filthy. I have both sets of reeds. the two petal reeds are set in a 2 bolt cage for a spree so I could sell that for a couple bucks, I still have the three petal reeds. Also have an extra spree engine case...

I'm thinking I might have to get a whole new kit. Which kinda sucks. Now I gotta find something to do with all the extra reed valves I have because none of them fit my stock intake. Not that I'm even going to use the stock setup since I have a CT setup coming.

Like this....

Okay here's the questions.... 1. Does the warranty cover this? Doesn't hurt to ask. 2.The cyclinder, is it okay? And if so since malossi doesn't let me buy individual parts from the kit, could I just get a polini 47mm piston? 3. I'm going to disable the oil pump and premix from now on. What ratio sh...

Piston, toast


Cylinder, donno.

Pictures first, then questions. Probobly some stupid ones but it doesn't hurt to ask. Then after all that we can add a sprinkling of verbal chastisement.

I'm taking the engine out and bringing it up to my apartment in the morning.

I was able to get ahold of treatland and have them change my carb to a 21mm before it ships. :-) if your getting the 21 then starting jetting point will be 42 pilot,110 main, air fuel screw 1 3/4 turns out, needle clip 1 up from middle. pilot jets to get ,38,40,45. main jets 103,105,108,112,115 Tha...

I was able to get ahold of treatland and have them change my carb to a 21mm before it ships.

Will it help out better when I add an exhaust and taller gears?