Search found 31 matches
- Sun Jan 29, 2012 3:59 am
- Forum: General Discussion
- Topic: Help!! Spree won't run after carb rebuild and tune-up, etc.
- Replies: 7
- Views: 3080
Re: Help!! Spree won't run after carb rebuild and tune-up,
Getting anywhere, Nicwoods6? You got this thing running yet?
- Sun Jan 29, 2012 3:57 am
- Forum: Technical Help
- Topic: 89 elite wont runn???
- Replies: 53
- Views: 17692
Re: 89 elite wont runn???
Nice! Happy to hear you got it rockin and rollin! Okay i replaced all the hoses added a fuel filter and even installed a valve shut off for the gas so i can drain the gas from the carb when it sits for more then a month. Again i really appreciate you guys for helping me! :peace: :coolcruise:
- Wed Jan 25, 2012 3:50 pm
- Forum: Technical Help
- Topic: 89 elite wont runn???
- Replies: 53
- Views: 17692
Re: 89 elite wont runn???
OK, back on track. Since you're confident that your petcock is functioning properly when vacuum is applied, it is likely that your needle valve is sticking shut. What is supposed to happen is that: 1) vacuum is applied, causing fuel to run into the bowl, 2) bowl fills up until float rises, 3) needle...
- Wed Jan 25, 2012 1:41 pm
- Forum: General Discussion
- Topic: Help!! Spree won't run after carb rebuild and tune-up, etc.
- Replies: 7
- Views: 3080
Re: Help!!
Did your scoot run before you cleaned the carb? If so, we can narrow it down to issues with the carb rebuild/reassembly before we go in all sorts of directions. Keep in mind the airbox needs to be installed for it to run. You may want to read through this thread to see the issues that someone else i...
- Wed Jan 25, 2012 1:36 pm
- Forum: Technical Help
- Topic: 1985 aero belt change
- Replies: 6
- Views: 2898
Re: 1985 aero belt change
Good call, Bear. Thanks!
- Wed Jan 25, 2012 1:24 pm
- Forum: Scooter Showcase
- Topic: 1987 Honda Elite S w/ pictures 99.01%
- Replies: 120
- Views: 42272
Re: 1987 Honda Elite S restore w/ pictures 94%
d***. That black/red combo looks pretty sweet. Reminds me of a Canadian Elite R - only badder
- Wed Jan 25, 2012 1:17 pm
- Forum: Technical Help
- Topic: How rusty is too rusty
- Replies: 3
- Views: 1566
Re: How rusty is too rusty
Nice. I didn't think anything could cut through that much mud! I'd love to see pics if you still have them.
- Wed Jan 25, 2012 1:16 pm
- Forum: General Discussion
- Topic: Spreescicle
- Replies: 6
- Views: 2422
Re: Spreescicle
Yikes! Stay warm up there! So, are any of your scoots running studded tires? I used to have an SL70 I would run on frozen lakes in Wisconsin
- Wed Jan 25, 2012 1:13 pm
- Forum: Technical Help
- Topic: 1985 aero belt change
- Replies: 6
- Views: 2898
Re: 1985 aero belt change
As long as you're in there, you might as well as give the variator/clutch surfaces a scrub/wipe down. I don't know what it is recommended, but I used some paint thinner and a light abrasive pad, making sure to wipe the surfaces clean with water when I was finished. Mine had a light film of oil/greas...
- Wed Jan 25, 2012 1:05 pm
- Forum: Technical Help
- Topic: Carb HELLLLP
- Replies: 7
- Views: 2568
Re: Carb HELLLLP
If you can get to a hardware store, I would suggest spending a dollar and picking up a short length of hose for that drain tube. It's usually about 5 or 6 inches. It makes draining the carb a nice, clean job. Draining the carb bowl is something you should anytime you're not going to ride your scoot ...
- Wed Jan 25, 2012 1:01 pm
- Forum: Technical Help
- Topic: Spree bogging down with air filter?
- Replies: 28
- Views: 7352
Re: Spree bogging down with air filter?
Here's to hoping your part arrives by the end of the week. I know how frustrating it can be waiting on jagoff shipping and handling! :thumbsup: The scooter would climb to just about 30 and not bog at all with the bottle cap setup that it had when i bought it. Now after installing the factory filter ...
- Wed Jan 25, 2012 12:54 pm
- Forum: General Chit-Chat
- Topic: my new jog
- Replies: 11
- Views: 5380
Re: my new jog
Agreed. No more stickers! You might want to resell it someday
sanjuro wrote:That looks mint, but please don't muck it up with any more stickers.
- Wed Jan 25, 2012 12:52 pm
- Forum: General Discussion
- Topic: Elite 50 oil screen
- Replies: 3
- Views: 1948
Re: Elite 50 oil screen
I agree with bakaracer. You don't want to risk running without an oil filter. Is there a specific reason you want to run without it?
- Wed Jan 25, 2012 12:45 pm
- Forum: Technical Help
- Topic: 89 elite wont runn???
- Replies: 53
- Views: 17692
Re: 89 elite wont runn???
Let's back up a second... Is your carb back in place? If so, is the fuel bowl filling up now? If not, herein lies the primary issue. Until your carb is filling up with gas, I don't think you should assume the bystarter (or anything else) might be your problem. You mentioned early on in your posts th...
- Wed Jan 25, 2012 12:22 pm
- Forum: Technical Help
- Topic: How rusty is too rusty
- Replies: 9
- Views: 4134
Re: How rusty is too rusty
So you used CLR to clean the tank? Were you impressed with the results? Do you have any pics? I have to clean a tank soon, and I didn't see CLR listed on this page: (I am considering the slower vinegar method)
http://www.mopedarmy.com/wiki/Removing_ ... a_gas_tank
http://www.mopedarmy.com/wiki/Removing_ ... a_gas_tank