Honda Spree and Elite 50 Forums

What are your speeds at those rpms? And what pulley are you using in the front?

Like to take pictures when my bike is running good

Upgraded my s trans to zx style with a malossi torque driver hoping this would help lower my rpms and not shoot past my powerband and let me tell you this was of my best investments yet! With the s trans I'll be running 42grams and still reving 10800 near 69mph but take off was a tad slower any ligh...

Did some tuning on Friday and no matter what I did it could not break 70 one thing I did not change during my tuning was my center which stayed at 15% maybe If I hold it longer for a mile maybe but each time I get to 69 I'll over Rev. To 12-15k depending on how long I continue to hold it. This is al...

Idk but I've been hitting all types of max rpms due to over revs all with a 1000 malossi center having difficulty holding the rpms in my powerband here's one at 14k shoot way past my powerband. I'm trying to stay away from stiffer centers but it seems I may end up stepping up and lose my daily to a ...

In this picture you'll see what I mean by kicker will hit case because of the curve the cover has

Got it mounted might try a different color but I still like it. One thing I just found out tonight tho is stage6 or any straight back kicker lever won't work on dd50 covers since it will not clear and will hit cover when trying to kick start :( http://i13.photobucket.com/albums/a278/jsixzonev/mopeds...

Gave it a textured/hammer paint can't wait to bolt it on tomorrow to see how it looks

Have one and I have to say was one of the best shock I ever owned. Can't wait to get a hold of another one when brandon brings it in. As for the length it was inch longer than stock

For cutting I used a dremel with various bits mostly used the reinforced fiber wheel to do most of the cutting and a right and a right angle adapter for the insides. Used a pack of 5 disc to complete the job if I had better equipment t I would've cut the time in half since dremel got extremely hot m...

Bump to added specs on motor and quick video link!!

All done now I just got to add paint. Never doing this cut again took me half the day...

Test fit. Need to cut fins on the inside of the kicker since it shows , more cutting/work "sighs"

Didn't get to do runs but this weekends project was something I always wanted to do with a dd50 kicker cover http://i13.photobucket.com/albums/a278/jsixzonev/mopeds/20150418_162358_zpsow3iqyhx.jpg http://i13.photobucket.com/albums/a278/jsixzonev/mopeds/20150419_124708_zps6gaezgkb.jpg Was a b#!/0/ to...

Malossi aluminum gears are 8.44. My old setup was this same mhr bore and crank with a scorpion 24 oko carb went 74mph@11,xxx.