Search found 62 matches
- Tue Oct 02, 2012 8:16 pm
- Forum: Performance Technical
- Topic: Just asking
- Replies: 74
- Views: 21536
Re: Just asking
Well guys i actually finished up the moped tonight. It ran with the custom exhaust on it but top speed was around 30mph. I switched the stock pipe back on... oooooooo man... im gonn have to gps it because the speedo needle is resting on the bottom of the gauge!
- Tue Aug 07, 2012 12:19 pm
- Forum: Performance Technical
- Topic: BBK problem
- Replies: 7
- Views: 3150
Re: BBK problem
idk my signature is just a saying. But yes it was the stock crank. I have no clue what the deal was but it works now that i shaved 3/16 off the bottom of the skirt. I just have to finish putting her back together and i can ride her. With the 24mm carb it disabled the oil pump so i just pulled off al...
- Mon Aug 06, 2012 12:00 am
- Forum: Performance Technical
- Topic: BBK problem
- Replies: 7
- Views: 3150
Re: BBK problem
Yes i did
- Sat Aug 04, 2012 1:55 pm
- Forum: Performance Technical
- Topic: BBK problem
- Replies: 7
- Views: 3150
Re: BBK problem
Sanded the piston this morning. took off about an 1/8 inch okk the bottom of the piston skirt and now it is the same clearence as the stock piston. Well i got her put back together and she runs now. Just idling at te moment
- Fri Aug 03, 2012 11:48 pm
- Forum: Performance Technical
- Topic: BBK problem
- Replies: 7
- Views: 3150
Re: BBK problem
apparently its a 49mm bore but why does it need to get milled. the cylinder fits on fine. Tomorrow morning im going to mill the skirts down. Im milling them to be the same size as the stock piston. then tomorrow ill have this beast finally running.
- Thu Aug 02, 2012 5:55 pm
- Forum: Performance Technical
- Topic: BBK problem
- Replies: 7
- Views: 3150
BBK problem
Okay so i got the NIKASIL BBK for my 01 elite sr. And apon putting the piston onto the rod and putting it together the motor wouldnt turn over. After further inspection i relized that the bottom of the piston skirt is hitting on the crank causing it to stop. Everything fits on it and i dont have any...
- Wed Jul 18, 2012 4:01 pm
- Forum: Technical Help
- Topic: Front Wheel Swap
- Replies: 3
- Views: 1786
Re: Front Wheel Swap
It is for an 01 elite sr. I cant post pictures because it just keeps telling me my file is to big
- Wed Jul 18, 2012 11:42 am
- Forum: Technical Help
- Topic: Front Wheel Swap
- Replies: 3
- Views: 1786
Front Wheel Swap
Does anybody know of an aftermarket front rim that will bolt on to an 01 elite. Mine is bent and if i have to pay $50 for a new "used" one then i might as well do something that i like.
- Sat Jun 30, 2012 2:04 am
- Forum: Performance Technical
- Topic: Just asking
- Replies: 74
- Views: 21536
Re: Just asking
Please state the reason I'm lacking intelligence
_______________<- here
_______________<- here
- Sat Jun 30, 2012 1:47 am
- Forum: Performance Technical
- Topic: Just asking
- Replies: 74
- Views: 21536
Re: Just asking
if i wanted safety i would install a 5 point harness and a roll cage!
- Sat Jun 30, 2012 1:05 am
- Forum: Performance Technical
- Topic: Just asking
- Replies: 74
- Views: 21536
Re: Just asking
thanks. is there anything else i could get to get more mph. i already have a pipe and a carb
- Sat Jun 30, 2012 12:23 am
- Forum: Performance Technical
- Topic: Just asking
- Replies: 74
- Views: 21536
Re: Just asking
ok........... so let me get this straight...... the gears i ordered will work?...
- Fri Jun 29, 2012 11:43 pm
- Forum: Performance Technical
- Topic: How does cylinder size affect power
- Replies: 6
- Views: 2857
Re: How does cylinder size affect power
Sure size has an effect but with these little motors port timing is king. Most of the the large Taiwan bores have junk port timing. Also remember the motor was designed for 50cc so bigger cc requires more modification/porting to the block to take advantage of the extra displacement. those were my t...
- Fri Jun 29, 2012 11:40 pm
- Forum: Performance Technical
- Topic: Just asking
- Replies: 74
- Views: 21536
Re: Just asking
but i want to gain alot of topend
- Fri Jun 29, 2012 11:16 pm
- Forum: Performance Technical
- Topic: Just asking
- Replies: 74
- Views: 21536
Re: Just asking
Do i need primary or secondary Gears??? I weigh around 150