Honda Spree and Elite 50 Forums

Amazon has lots of gel pads for sale. I see a lot of ruck guys that shave their seats and then add a gell pad or memory foam pad in the middle of the seat to make it more comfortable even though it's thinner.

d*** supplied parts will get you everytime! Lol glad you got it sorted out man!

Took the aero for a couple short rips up the street and back to feel the glory and glory I felt. My vapor needs a new battery so I don't have my cht or tach readings so I didn't want to ride much. But man did she feel smooth, throttle response on the Dellorto 25mm is amazing and the scorp man does s...

I think he means a mount for the speedo sensor? I made one for the front took about 10 minutes. The kit comes with a bracket that's works for the rear.

Just finished assembly. 85 Aero with full MHR AF16.

She runs!!! Started right up after I remembered the brake switches lol. Sounds mean and has some real nice torque! http://i103.photobucket.com/albums/m133/Curtis966/Mobile%20Uploads/989E1228-0D50-44C2-B970-D2C6EDD7C87F_zpszbwerieg.jpg A little video of her first breath! http://i103.photobucket.com/a...

The AF16 or "Dio" motor is the favorite here on the forum. It has a great aftermarket scene has some awesome 72cc bores and can be built up to 125cc.

The stock variators are junk. Any aftermarket varaitor even the $25 eBay ones are more useful. Which aftermarket one did you buy? I would also drop to about a 36 gram load and throw in a 1k center spring. How's your belt?

I'm attempting to upload a video of the break in run, half thottle forces it into 10.5k and it grips great. I'm running malossi 16/32 primary gears with a pirelli diablo 130/70-12 so this clutch is taking some abuse from a dead stop. I can't wait to open her up. Sounds sweet! I have a polini 2 shoe...

I've seen a couple spree gy6s not that difficult really especially if you find a bottom mount gy6 then it would be a piece of cake. The hard part is building a mount for a top mount gy6. Why gy6?

Looks good with the stroker under her!!

Only time I use non honda parts even if they are still available oem is when malossi or polini make a better version!

mrgoodness wrote:Ok thanks for the info, that makes sense.

I forgot you will also need a drive face from a kicker model as well because your drive face is smooth and doesn't have the teeth required for the kicker to engage.

I did my cut where it's straight so that when the back half is welded back on it has the same turn down as stock. I did this with both of my mounts. Also uses square stock but put it inside of the mount. If you cut in the right spot it's a perfect fit. http://i103.photobucket.com/albums/m133/Curtis9...

I'm not sure you can drill a hole and add the parts nor do I think it would be cost effective. But you can get he cover from another af05e motor from later aeros or elites and it bolts right on.