Search found 512 matches
- Sun Jun 07, 2015 11:41 pm
- Forum: Technical Help
- Topic: clutch bell cover over pads
- Replies: 46
- Views: 18555
Re: clutch bell cover over pads
I'm pretty sure the only bell I've ever seen not fit is the naraku so the conversation is stupid. Ramble ramble ramble
- Sun Jun 07, 2015 11:38 pm
- Forum: Performance Technical
- Topic: Polini corsa compression readings after 2 years.
- Replies: 11
- Views: 6491
Re: Polini corsa compression readings after 2 years.
Dude quit with your rambling nonsense and cluttering up the board it's getting old and really annoying. You and maddog can get a room and talk your dumb s*** together.
- Sat Jun 06, 2015 2:43 pm
- Forum: Scooter Showcase
- Topic: My 85 AERO 50 "ERRL"
- Replies: 64
- Views: 39984
Re: My 85 AERO 50 "ERRL"
Well today was a great day of tuning. I put about 35 miles on the Aero and she's running like a champ! I have a little work still to do in the cvt but the carb is about perfect and plug is looking good running 100/55 jets air screw about 1 and 3/4 out idles at about 2900k and launches at 5500k and l...
- Fri Jun 05, 2015 10:38 am
- Forum: Performance Technical
- Topic: Easy question on gear change for a dio
- Replies: 10
- Views: 5896
Re: Easy question on gear change for a dio
The drain plug is also the till hole. Put the scoot on a level surface and fill untill it starts flowing out and cap should be about 3oz.
- Thu Jun 04, 2015 12:29 pm
- Forum: Performance Technical
- Topic: Easy question on gear change for a dio
- Replies: 10
- Views: 5896
Re: Easy question on gear change for a dio
Order the gasket if it's never been off its not gonna come off clean. Uless you have a press your self you will need to have it done, mine have never cost more then $10-$15 bucks. Your prolly gonna want something closer to 6g range for rollers but that's personal preference and I'd throw in a 1k cen...
- Wed Jun 03, 2015 10:47 pm
- Forum: General Discussion
- Topic: What is the difference between engine types and nomenclature
- Replies: 5
- Views: 6661
Re: What is the difference between engine types and nomencla
The NQ, NB, SE, Sa, DIO are model number for the scooter its self. The Af05, Af16, Af18 are engine model numbers. NQ is spree and has a non variated AF05 NB, and SE are Aeros and early elites and the have the variated AF05 SA are the later elites starting around 1994 and are AF16 DIO is the outside ...
- Wed Jun 03, 2015 8:59 pm
- Forum: Scooter Showcase
- Topic: My 85 AERO 50 "ERRL"
- Replies: 64
- Views: 39984
Re: My 85 AERO 50 "ERRL"
Got some tuning in yesterday. Picked up some VW Bug gaskets for the exhaust sealed that problem up tight. Cut my shrouds so my spark pug fits better. Finally got a good WOT run in hit 52.5 mph at 9700 rpm high temp was 325 degrees I'm pretty sure she had more to give but I was coming up on traffic s...
- Tue Jun 02, 2015 11:44 pm
- Forum: Builder's workshop
- Topic: 1994 Honda Elite S SA50 Build
- Replies: 5
- Views: 5159
Re: 1994 Honda Elite S SA50 Build
^ All great advise. You get what you pay for.
- Tue Jun 02, 2015 8:12 pm
- Forum: Technical Help
- Topic: SE50 Performance Help
- Replies: 1
- Views: 1723
Re: SE50 Performance Help
My buddy has some sweet parts for you. Check out my forsake ad. http://www.hondaspree.net/phpBB3/viewto ... 01#p271701
- Tue Jun 02, 2015 2:23 pm
- Forum: Technical Help
- Topic: Honda elite steering
- Replies: 5
- Views: 2626
Re: Honda elite steering
I have a nice powder coated set off my aero not sure if they are the same length stem or not though. I can measure if you want. http://i103.photobucket.com/albums/m133/Curtis966/Mobile%20Uploads/7773654E-A75E-4C93-9B58-896E50712831_zpsksc5zt2v.jpg http://i103.photobucket.com/albums/m133/Curtis966/Mo...
- Tue Jun 02, 2015 1:24 pm
- Forum: General Discussion
- Topic: HI from Taiwan
- Replies: 28
- Views: 15280
Re: HI from Taiwan
Idk if I've really seen dio rear wheels with hubs except these ones. Fronts are normally 4x90 or 4x110. There are other hubs other then the kymco that ruckus guys use but are all over $100 but they come with different parterns some with 2-3 on one hub.
- Tue Jun 02, 2015 12:15 pm
- Forum: Performance Technical
- Topic: Somewhat Quite Exhaust for 72cc Malossi Cast Cylinder
- Replies: 13
- Views: 7026
Re: Somewhat Quite Exhaust for 72cc Malossi Cast Cylinder
If you can find one I was told the SEF Black is pretty quite and a good performer. The v8 is quite but not quite a performer but better then stock I'm sure. Haven't ran either myself just what I'm told.
- Tue Jun 02, 2015 12:12 pm
- Forum: General Discussion
- Topic: HI from Taiwan
- Replies: 28
- Views: 15280
Re: HI from Taiwan
Nice if its 4x140 the kymco hub will fit it for the rear.
- Mon Jun 01, 2015 3:26 pm
- Forum: General Discussion
- Topic: HI from Taiwan
- Replies: 28
- Views: 15280
Re: HI from Taiwan
And what's the bolt pattern?
- Sat May 30, 2015 11:39 pm
- Forum: Scooter Showcase
- Topic: My first spree
- Replies: 7
- Views: 7295
Re: My first spree
Use photobucket nice and easy. And congrats man welcome to the addiction