Honda Spree and Elite 50 Forums

How do you rate the malossi over the stock cdi? what are the benefits?

That's a early aero they are sweet. Should have a ab07 motor not af05 but they are peppy motors and have tall gearing installed so if you can get the rpms up you can prolly see some decent speed out of it.

^ this guy lol. Rabble Rabble Rabble!!!!

Welcome to the forum! Lots of sweet parts in your part of the world! Those rims are a prime example very nice

I ran a 90 on my aero when it was stock only upgrade was a malossi wild lion pipe.

69mph sounds pretty fast. Any faster would take a very good tune in all category's. CVT and carb tuning to the max.

Any other mods done to the motor? What pipe did you weld up to fit it? What did it come from?

I will check there. She's running good seems to be about the same as when I had the 100/55 in but now a little snappyer on the throttle. I have the idle set at about 3k air screw 1.5turns out starts first kick everytime. I plan on putting together a leak down tester after this weekend to do a full c...

Did a little tuning today up jetted to 105/57 and maxed out my white springs in the clutch, and dropped to 33.6g in the variator. Take off is good I'm gonna swap in the orange springs I want to be at about 6.5-7k launch and it's only at about 5ish now. And I figured out my exhaust problem, my lower ...

Yeah any machine shop will be able to do it for you and should leave you a clean flush face.

He used a mill not a drill and I believe you need to take about .075 inches off of it and you will clear the shoes and not be to far and hit your splines with the nut.

AF16 MHR crank and bore, 25mm dellorto, 8.44s, polini and stage6 CVT, and the Scorpion! Just after final assembly :) http://i103.photobucket.com/albums/m133/Curtis966/Mobile%20Uploads/5E4B6CAF-7244-4B7F-893B-D28BE4AE198D_zpsyfj1ynsn.jpg Loaded up! http://i103.photobucket.com/albums/m133/Curtis966/Mo...

Yeah and that's without my 230 frame sitting on it lol. I think a little mount tweek will bring it up a bit. Other then that I'll just take rights easy and take more lefts!

Also I have a slight pipe problem. 2 actually. I think maybe my copper gasket needs some love to get it true and flat as I have a little oil on the exhaust flange second is the fact that it's about 2 inches off the ground when riding and right turns are near impossible to lean into. Gonna have to ch...

Well I put about 5 miles on the aero today just rippin up the blocks near my house. I don't have my shrouds hurt so I don't wanna travel far as I haven't been letting it get over 300 degrees. Any way so far the mhr is a beast. At is sits the cvt is this. Polini for ruck with 36 grams, naruku drive f...