Honda Spree and Elite 50 Forums

where can one buy spree swingarm bushings?

not that tube,the one that extends from bottom of carb body into flat bowl.(pilot circuit?)it has a micro hole one can poke a guitar string through.

is it possible to remove brass tube from carb body to clean the micro hole?

no i never tested it wot it read 75 lbs. dry + wet with throttle closed.

i forgot to hold throttle open.i put regular oil in plughole+immidiatly cranked it+still 75 lbs.

bear was right,i put a better compression tester (the screw in hose type)+compression read 75 that seams low w new piston,rings,honing.ill clean carb better.

i also put all new seals+float needle

soaked it all in acetone for 2 weeks,pushed out the "main jet? thing w the little holes blew air + carb clean every wich way ,even that hole in bowl bottom.

carb was cleaned thoroughly

THANK YOU so much for your thoughts bear.the original pisto n is "dished" sorry for calling it flat.im leery of running flat head w dome piston due to piston hitting head.would every thing else withstand more compression having 25 yrs+2000k?have not confirmed tester is good but when i gave...

hi,i purchased an 85 spree basket case,guy said it siezed+he broke new ring assembling it.it came w new DOMED PISTON+HEAD (old ones were flat)i measured cylinder its within specs,honed it but ring would not colapse enogh w expansion ring under it.(i notice aftermarket pistons dont have the third oct...