Honda Spree and Elite 50 Forums

I have the jet out of an SE50 in it now

Ordered your link. Understand what your saying.

I can't wait to tear this thing around the Chump Car pits at Watkins Glenn!

This is what i bought and whats on the scooter is exactly the same thing

http://www.ebay.com/itm/271025670417?ss ... 1439.l2648

If you look at the picture, The aftermarket one that i bought is the same as the one that was on the bike. The ramp plate is the only thing that did not come with the kit i bought so i just ordered it.

They both are identical. They weigh the same and they look the same. Even the rollers are the same weight. Someone must have changed this before.

No, it did not come with a new ramp plate unfortunately. I would have thought so. On my picture. Those two parts are the same correct?

Ahhh your right.

So a little update, I got all the parts i ordered(except the good carb). I did however get the Chinese carb and can definitively confirm that the real one is 100% beter. Some of the diffrences i found were that you needed longer bolts to mount it, The hose fittings are different sizes, the oil feed ...

Its snowing, I don't think I'm taking it out haha.

Here's some pictures.

Its completely stock. so im assuming the SE50p has the 82 jets. The new Carb i bought is a SE50 with the 85 jets so i should be good.

Gaskets are not a issue anymore. I got all that cleared up.

I cut apart the stock exhaust looking for this "restricter" and cant find it.

I'm going to TIG together a new exhaust for this bad boy later tonight.

My shops on a industrial road so ill rip it down the road real quick and give you a top speed.

I have a little under 100 PSI, The guage im using is a POS from napa so im sure that its not giving me a accurate reading. Ill go get my good on later and try it again. But for the good news. I got that piece out and cleaned everything up. Pilot tube you can now see through. Also, it runs like a cha...

Ordered a whole new carb. I might be able to get the piece off that's in the old carb but it will take alot of time tinkering. Good thing I'm waiting on Manley to get its s*** together and send my pistons before I can put together my drag engine!