Honda Spree and Elite 50 Forums

Brank new crank at the same time as the bore kit I will look into a new ramp I thought it was just the roller weights but put new ones in and the noise was still there

I have what I describe as a knock or tick thought it was my CVT but ripped that apart and everything looks good, but a low idle around 1300 to 1600 rpm it makes this noise and it just started randomly any ideas? I have a molassi MHR 72cc big bore and a molassi crank

Sounds like your belt is probably the wrong size... its starting off in a higher gear and straining the motor down because you did say it was tight on there, check that or even put the old one back on and see where it sits on the rear pulley and compare to the new one!! hope this help a little!!

Alright Hey New To This Forum Just Looking For A Little Help With My New Setup. I Have A 1997 Honda Elite 50cc, Just Installed A MHR 72cc BBK, With A CT Chrome Intake, New Reed Cage, And A 28mm OKO Carb, I Installed Everything On The Scoot Yesterday And Iv Built Engines A lot Just Havent Done Much C...

hey New to This forum have myself a 1997 Honda elite 50 done a ton of reading on here and this is the first post that has made me nervous im doing a build as we speak im installing a MHR 72cc big bore kit, 28mm OKO carb, PG Long Exhasut and A Ruima 44mm Mini Stroker, Doing Some Tranny Work As Well, ...