Search found 105 matches
- Thu Apr 01, 2010 11:52 pm
- Forum: Technical Help
- Topic: Ruined big bore kit I think
- Replies: 8
- Views: 3508
Re: Ruined big bore kit I think
thanks for all the input.So should I be running premix in every tank of gas?I was told to add maybe a 1/4 ounce of oil to my first tank.Also, would you say a 90 jet would be large enough?I was told after the fact to go 2 sizes over the original which was a #80.I thought the #85 would have been enough.
- Thu Apr 01, 2010 8:47 am
- Forum: Technical Help
- Topic: Ruined big bore kit I think
- Replies: 8
- Views: 3508
Re: Ruined big bore kit I think
Stock carb with #85 jet.Stock air box.Stock gears, not sure what the ratio is?The rings are not stuck.I thought I had done enough research on this site but I guess not.These 2 strokes are alot more touchy than a 4 stroke and I guess I am not the first person to do this.The thing is how can you deter...
- Wed Mar 31, 2010 10:22 pm
- Forum: Technical Help
- Topic: Ruined big bore kit I think
- Replies: 8
- Views: 3508
Ruined big bore kit I think
I think I may have ruined my new bore kit!!I bought a bigger jet and Installed it when putting the new cyl kit in.Only went up one size on the jet which it appears was a mistake.Took the scoot for a drive and and then died.Thought at first I could of had soemthing witht he fuel line came losse or so...
- Tue Mar 30, 2010 12:57 pm
- Forum: Technical Help
- Topic: Weak, low power, and bog at full throttle
- Replies: 17
- Views: 6738
Re: Weak, low power, and bog at full throttle
I was going crazy trying to figure out why my 85 Aero 50 was "bogging down", but idled fine.Checked everthing I could think of at the time at least twice.I then decided to replace the reeds and that fixed it.I thought I was wasting my money on them, but was wrong.I had a series of posts on...
- Fri Mar 19, 2010 9:38 pm
- Forum: Technical Help
- Topic: Idles but loses power and dies when I ride it
- Replies: 2
- Views: 1996
Re: Idles but loses power and dies when I ride it
My Aero did the same thing when I started it.Ran good for a few minutes then bogged out.After weeks of frustration and countless trouble shooting I put new reed valves in and that solved the problem.
- Fri Mar 19, 2010 9:13 pm
- Forum: Technical Help
- Topic: cylinder base gasket
- Replies: 2
- Views: 1381
cylinder base gasket
Should I use some gasket shelac or other sealant to hold the base gasket in place?
- Sun Mar 14, 2010 10:13 pm
- Forum: Technical Help
- Topic: Honing cylinders
- Replies: 4
- Views: 2223
Re: Honing cylinders
thanks-The cylinder wall does have some scratches.How much honing should I do?Should I hone till the scratches are gone?Never did this before.
- Sun Mar 14, 2010 11:14 am
- Forum: Technical Help
- Topic: Honing cylinders
- Replies: 4
- Views: 2223
Honing cylinders
I wanted to hone the cylinders on my scooter,but not sure what people are using?I have a small hone designed for car brake calipers but it will not work since the stones are small and get caught in the intake and exhaust ports.The larger auto hones look like they will not be small enough to go into ...
- Mon Jan 18, 2010 10:07 pm
- Forum: Technical Help
- Topic: Hard starting when cold
- Replies: 2
- Views: 1497
Re: Hard starting when cold
thanks-I will give it a try.I never saw gas evaporate that fast that the bowl would get low in acouple of days.It always seemed to have plenty of gas in it.
- Sun Jan 17, 2010 1:17 pm
- Forum: Technical Help
- Topic: Hard starting when cold
- Replies: 2
- Views: 1497
Hard starting when cold
When I got my NB50 it started easily, but it had no power after a few minutes.After many weeks of frustration such as numerous carb cleanings and elcetrical checks I replaced the reed valve and it solved that problem.Now the bike is hard to start after replacing the reeds.Not sure what could have ca...
- Sun May 31, 2009 11:40 am
- Forum: Technical Help
- Topic: drilling out exhaust
- Replies: 1
- Views: 1180
drilling out exhaust
I have an 85' Aero 50 that runs well, but I have been reading about people drilling the exhaust out.Not sure if this is possible on my Aero?Any help would be appreciated.thanks
- Sat Mar 21, 2009 12:20 pm
- Forum: Technical Help
- Topic: leaking crank seal.
- Replies: 6
- Views: 2979
- Sat Mar 21, 2009 12:19 pm
- Forum: Technical Help
- Topic: hard cold starting after sitting more than a day or two.
- Replies: 0
- Views: 1465
hard cold starting after sitting more than a day or two.
My scooter is hard to get started after it sits for a few days and longer.Once warm it starts great.When I had got this scooter it had no power after it was warm so after much trouble shooting and extensive carb. cleaning an replacing the reed assy I got it running pretty well.Before replacing and c...
- Sun Sep 09, 2007 8:41 pm
- Forum: Technical Help
- Topic: Engine stalling when riding. Please Help!!
- Replies: 4
- Views: 2793
Man, does this sound familar! Seems to be a common problem.Mine did the same thing and I replaced the reed valves and gaskets and it cured my problem.I went thru the scooter so many times till I deciced to replace them.Also, spray carb cleaner or starting fluid around the carb and reed gaskets while...
- Tue Sep 04, 2007 4:00 pm
- Forum: Technical Help
- Topic: Free BBQ sauce to the one who has the answer!!!!
- Replies: 18
- Views: 6750