Honda Spree and Elite 50 Forums

Ok so.....attemped to mess around with this thing again. New problem...when you go full throttle it kills the power(electrical), release the throttle it has power. I pulled the motor and installed it on the 1986 Special, it appears the '84 has 2 wires and the '86 has one wire blue/yellow and green v...

I have not put a gauge on it. The reason for that is...the previous owner rebuilt it. I have a sneaking suspicion he forgot to put a gasket under the cylinder, I don't remember seeing it when pulled it apart to check the rings. I picked up a 1986 Spree Special non-running(free)....when you crank it ...

cool build

The new pipe is very light compared to the other one. There is a "good" spark, I changed out the CDI and Rectifier also. I know the motor was "gone though" prior to me getting it...I think Im going to blow it apart and recheck everything. My son wanted the wheels black so I did t...

I went though the harness, new main ground, added in-line fuse back to harness, and did a continuity check on all wires. I put another muffler on it and put a lid on the air box. Cleaned carb again....still not running.

The muffler is clogged..... I put it on anyway to see. Nope It had a BPR5HS plug, I installed the correct BPR6HS. Cleaned the carb again ohm'd out the alternator, ignition switch, stator, cdi...all within spec according to manual. I checked the reeds, fully closed. I going to pull the harness to see...

Everything in the carb looks good..bypass even ohm'd out good too.

Ill be picking up a muffler shortly.

I just was gifted a non running 1984 Spree. I drained and cleaned the oil/gas tank and lines, new oil and gas. It has fuel and spark. Carb wasnt too bad, main jet slightly clogged. It turns over but wont start, sounds like it wants to fire up only with a shot of fuel in the cylinder. There is no air...