Honda Spree and Elite 50 Forums

Cheers for the advice the oko is coming up on 2 years old so dont think it will last much longer.

Cheers wheelman 120 sounds good. Cant wait to get it tuned up correctly. I dont rate the power jet at all.

I havent actually even ran the bike yet on the current set up I know a 82 main will be way to small now I blocked the power jet. Im just after a starting point for the main. Im at the mines this week will do final tune on the weekend.

Hi guys just after some advice I've got around to pluging up the power jet on my oko 24. I have a malossi cast iron cylinder in my dd50. Currently runing a 45 slow and 82 main. What would be the best jet size to change to I was thinking 40 slow 114 main as a starting point any advice or previous exp...

I put the pressure on my dd50 to 35 psi

Check the pic on the web it is power jet carb.
Cant say I have it tuned 100 percent but its running nice enough. How do you think they compare to other carbs? Is it worth getting the molossi carb?

I am using the 24mm oko with the malossi cast kit. 86 jetting I know super small compared to everyone on here. If I go up it starts to run like crap. The plug looks good and I premix at 40 to 1 . I get good kms per tank and at full throttle have only hit temps of 330. Im at loss. I previously did 10...

Have you tried going lower on the jetting. I run a 86 jet it works doesnt overheat. Runs well. Any higher than a 92 it runs like crap

Have you tried going lower on the jetting. I run a 86 jet it works doesnt overheat. Runs well. Any higher than a 92 it runs like crap

I have the same but I'm only on a 86 main. Is yours ported. Every seems to be using much larger jets than I. If I put a 92 or higher it spits and is slow of the start with the odd back fire.

Cheers for the advice guys think im running a little rich top temp 270 when wot and 292 when turned the engine off.

Hi

Just got a cheap temp gauge 10mm too small to fit on the spark plug. Would placing it under one of the head bolts still give a accurate running temp? What temp range should be looking at achieving.

So did you get one?

1.5 to 2 turns out

Ok think ill upgrade the torque cam. Is there a decent scooter scene in nz