Honda Spree and Elite 50 Forums

a cht will save your top end, piston and cylinder. and treatland sells honda elite jets right now. i think you might have to search for spree, though. heh, i mihgt need to get me 1 or 2 of these.

i said it got fixed. too many stripped splines. the rear driven pulley isnt the problem, at least not yet. its not something to look at. at the cause of this problem. the beginning problem was the variator. then the rest of the problem which i cant be sure about, if i hadnt of gone that route, but n...

LoveMyHonda wrote:Sounds good, thanks for clarifying. Moving on.

Move back over to your topic
and the topic was gave to me by the mods. repeat what i said

mousewheels, i answered pretty much, his question.
that's all that needs to be said.

I don't have a better camera but you should know what I'm talking about.

look i dont care what guys who can't look at a picture and understand what someones saying has to say about anything. and im tired of screwing with you. mousewheels tried to learn. wheelman tromped along, and tried to push for more testing. which i was not wanting to at that time. now i have, now th...

if you dont trust your own modding what the heck are you doing even working on it .You obviously have no skills with small engines and conversations so give up and take it to the shop . It's been said before but he just likes wasting everyone's time with a problem that he can only have and his disc...

i think ill find no trouble solving my problem

you guys couldnt be clear to me in the other topic. i just wanted to clearly see something wouldnt require modding. It's said it would need modded to work, by the Company that sales it. Then I'm told otherwise. well, i just dont want to use it, and go by what someone says then break it casue of foll...

huh what? and where did i write I had a spun drive plate, at recently? he's took the topic out of context, took me out of context, the exact reason, which i've already stated i didnt want to add extra information. so it can be taken out of context. then as you're doing right now, blaming me for havi...

2 things about this other scooter driven pulley i noticed. but probably was ok. maybe. its nut i only checked with an impact wrench. came right off. no slamming a few hits. but its not very tight torqued anyway. I dont know. it looked fine. It's driven pulley, its bearing is going up and down. My dr...

No. It would explain, what? If my drive plate was spun I wouldnt be running the bike. at all. how would it get started? I said it awhile ago. It'd help when you quote someone and offer advice to scrib, quote when your taking their comment from so it's not took out of context. I cant even figure out ...

is that both sides? looks like that? this was only happenning on one side of my guides. i dont know what to do now. ive checked over everything. rechecked, and checked more. i have two possibilities. that koso variator done it. or the driven pulleys, outer bearing, is making a little bit of a noise....

So the question is the gray plastic panels, did they come gray from the factory or black? Experimented with propane torch on the side skirts.. Quick passes... Notice the difference... http://i65.photobucket.com/albums/h216/dem0nk1d/Honda%20Elite%20SA50/05_zpsc841ca7e.jpg they come black this is abo...

the outer part. im not having a ring getting dug in on the back now, and i dont have to use the stock ramp plate. but i am using the stock variator with the same results. i need to use this other stock type i got on ebay, looks the same just doesnt have metts and stuff wrote on it, i thought maybe i...

Your pictures are confusing. They make no sense. What's the point of it? Looks like you're showing sliders but why. I'm lost. Fwiw I havent changed my sliders or vario on my race prepped mhr build ever and it's going on 3200+ miles strong. And same malossi belt. wheres your pictures at? I sure coul...