Honda Spree and Elite 50 Forums

Thanks so very much..!!

OK, just jumped black and red wires from connector leading to the ignition switch , I definitely had spark , so yes the ignition switch must be grounding itself out, thanks for the help , now who gets the $20.00 happy Thanksgiving everyone

Will do , I'll get back shortly with a response ..!!

You could simply unplug the CDI and ignition switch, then check the black/white wire to make sure it has no continuity to ground, that wire must be open circuit. Then reconnect the CDI, leaving the ignition switch disconnected, then jump the black wire to red wire , this will simulate the key in th...

Ok guys , thanks for all the help , it must be the ignition switch that's bad , cause when the connector is unplugged to the ignition switch , the cdi connectors black /white to green show continuity when the kill switch is off ,"bike in running position", but when the kill switch is on ,&...

Will do, thanks so much ...!

So are you thinking its the ignition switch or the kill switch, thanks so much..!!

I'm maybe thinking the switch'es internal working got fried cause the bike did run just about 2 weeks ago , I even drove it around , nothing has been changed on the wiring since then , if the switch connector was reading 2 weeks ago the way it is now , it wouldn't have started much less ran , I've o...

And what I'm getting is exactly opposite of this pic , black/white and green on my bike show continuity only when the key is in the on position , then the black and red wire show continuity only when the key is in the off position , this is the weirdest thing I've seen , please continue to help me ..!

I posted the schematic from the manual , here is what I'm going by pic is attached , thanks everyone for helping me , I hate an electrical problem ...!!

I'm thinking it must be the ignition switch , it says with the key off I should have continuity between the black /white and green wire , and I don't. but I do have continuity when its on , between the black/white and green wire . Then it says with the key in the on position I should have continuity...

Yes I sure have , its not getting anything with out the cap on or off , thanks please keep helping me trying to trouble shoot, any help will be much appreciated ..!!

I have a Honda Elite Ch80 a 2005 , has very good compression , was running , but wasn't running great , I've done a valve adjustment and it was running better , I had used a jump box on it quite a bit to get it to start better , even after buying a new battery . Finally I developed no spark , I did ...