Honda Spree and Elite 50 Forums

whats better high compression or low compression? and whats the best compression to be at?

d*** my stock corsa with 7.2:1 gearing hit 75mph lol and im running a 28mm polini carb. stretch was about .7 miles

hey howd the 48 pilot work for you? I got a 28 mm polin carb and trying to get my pilot right. my main jet is at 128 right now and pilot is at 48. when Im cruising I watch the temp creep up. past 305 im not used to it creeping up. im used to it just staying under 300 haha.

weired I have a complete zx driveface, zx boss and zx trans. and a malossi zx belt

If your clutch pads are worn out then the bell should be a nice, royal blue color by now..... clutch pads are brand new not even 50 miles on them. Greetings: I'd like you to specify if you ONLY swapped the pipe or if you installed some other components from your list in the first post. The transmis...

Friend told me I might have to go lighter on my weights. Said that's the chamber in the pipe might have to be filled in order for the bike to move. Was able to get the bike moving and had to Rev and Rev the bike. All I can say is that when it gets moving this s*** moves quick. Gonna try fine tuning ...

gonna recheck everything again tonight when I get home. basically it was working fine, I just swapped the exhaust and it fired up right away. reved it and tried to throttle it and just revs. like its stuck. gonna try put it on the stand and see what happens to the belt when I rev it up. was thinking...

ok so I just swapped out my v8 for a sef replica pipe. changed weights and jetting for the sef copy pipe. af16 block, corsa bore, 28mm polini carb, stage 6 manifold, Kelly variator, sef ramp, 7g weights, 1500 center spring, 4k clutch springs, malossi Kevlar belt, zv trans, malossi bell. i try to thr...

bonesv wrote:Never used one of those, but I heard the quality of some of the materials was not all that good.
Is this one similar to the infamous DDX air box I've heard about?

Ddx airbox almost looks like the af18 airbox but comes with a bigger spigot.

Anyone using the oko airbox? How do you like it?

i would say good pipe for stock bore, or cast. THe contessa seems like more of an aggressive bore vs the cast. You may rev to 9k with that pipe, but I bet your going to see peak power at 6-7500, then losing power 8k, hitting 9k if your lucky. Don't expect high rpm's or power, that being said its pr...

1man8scoots wrote:50mm = 81.25cc.

Oh i c. Thanks I think I got to grab the 26mm cause I have the 28mm on my 72cc and my top speed so far has been 56mph. Wonder if I put on the 26mm it will make a difference on my top speed.

9k is pushing the power ceiling. The 28mm is for 50mm low revving bores, the 26mm is for 72cc low revvers, 30mm is for mini stroker 86cc+ low revvers. They don't fall apart as bad or quickly as a pg. They make a lot of grunt down low then taper off after 8k. So the 28mm is for the bores smaller tha...

whats your opinion in the yms 28mm? also what rpm does it make peak performance?

My setup is a 72 molassi cast, stock carb jetted with dd50 airbox, 8.4:1 gears, 28mm yms pipe. Top speed I got was 53mph flats. Trying to tune the carb and weights to make it a little faster. My friends setups hits 65 mph no problem.