Search found 11 matches
- Wed May 11, 2016 6:40 am
- Forum: Technical Help
- Topic: Aero 80SS carb slide question
- Replies: 2
- Views: 2205
Aero 80SS carb slide question
Carb is marked PB 54F. Does anybody know if the slide from a plain nh80 is the same or any other Honda that will fit. It is a 16mm Keihin.
- Mon Nov 16, 2015 2:59 am
- Forum: Performance Technical
- Topic: Exhast selection help
- Replies: 7
- Views: 6118
Re: Exhast selection help
bonesv wrote:
Hey Richy, did you install those Boyesen reeds? They are supposed to give pretty good performance all around on the NH80 stock motors. You have them on the 50cc model?
They work great! Thank you!
- Sat Nov 14, 2015 4:24 pm
- Forum: Performance Technical
- Topic: Exhast selection help
- Replies: 7
- Views: 6118
Re: Exhast selection help
I totally agree. What is more it works really well. What is even better it cost USD 50. I know shipping to the US is a nightmare but in Italy and France there are quite a few interesting parts for the NH50 Lead and Vision and Peugeot SC 50 Metropolis which is the same thing. I usually see a bunch of...
- Sat Nov 14, 2015 2:22 pm
- Forum: Performance Technical
- Topic: Exhast selection help
- Replies: 7
- Views: 6118
Re: Exhast selection help
Endresult is neither. I have bought this: _IMG_000000_000000.jpg NOS in original box IMG_20151114_201456562.jpg Installed: IMG_20151114_201456401.jpg It goes very well, brought 7 mph more topspeed(easy 52-53) and much better acceleration over 35 mph. Its not too loud with nice deep tone. Easily revs...
- Fri Oct 30, 2015 5:34 pm
- Forum: Performance Technical
- Topic: Exhast selection help
- Replies: 7
- Views: 6118
Exhast selection help
Hi! I need your opinion which to go after for an AF01 with contessa. 1.Leo Vince SP3 2.Gianelli Go 3. Polini /attached pic/ I have a sito and a Gianelli power but I want something revving a bit higher the gianelli is very good but does not do much over 7500. The sito revs to 8200 but everywhere much...
- Mon Sep 21, 2015 11:33 am
- Forum: Performance Technical
- Topic: AF01 Advice needed
- Replies: 1
- Views: 1976
AF01 Advice needed
Hi! I have an AF01 engined Peugeot. Setup is as follows: Polini contessa Malossi head modified CCR 7.3 squish 0.9 19mm Dellorto and Boyesen reeds Polini variator 6x7.5 gramm 15x740 belt Final around 7.5 /15/33 primary/ Two pipes both for torque one a bit stronger one revs a bit higher neither does a...
- Thu Jun 11, 2015 12:40 pm
- Forum: Performance Technical
- Topic: Polini oversized piston substitutes
- Replies: 1
- Views: 2152
Polini oversized piston substitutes
Hi. I have a well worn contessa on my scooter. During searching for oversized pistons I realised that Polinis are hard to get and cost an arm and a leg. But: Vertex pn: 2275 040 and ProX 01.7016.040 are exactly the same pistons from the same cast. Meanwhile I bought a brand new contessa on ebay for ...
- Sat Jun 06, 2015 3:29 pm
- Forum: Performance Technical
- Topic: Euro gear info
- Replies: 1
- Views: 2167
Euro gear info
Hi!
I did some reserch on the euro final drive ratios:
NH50 Lead: 12:34 primary and 13:44 secondary 9.59
NH80 Lead: 15:33 primary and 13:44 secondary 7.45
Peugeot SC50 13:34 primary and (most likely13):44 secondary 8.85
Sorrily neither is available new as usually the countershaft is discontinued.
I did some reserch on the euro final drive ratios:
NH50 Lead: 12:34 primary and 13:44 secondary 9.59
NH80 Lead: 15:33 primary and 13:44 secondary 7.45
Peugeot SC50 13:34 primary and (most likely13):44 secondary 8.85
Sorrily neither is available new as usually the countershaft is discontinued.
- Fri May 29, 2015 4:36 am
- Forum: Performance Technical
- Topic: Anybody know anything about this Gianelli Pipe?
- Replies: 6
- Views: 4729
Re: Anybody know anything about this Gianelli Pipe?
As mine is in fact a Peugeot sc50 it has a separate header and the muffler is a slip on to it. It is the same size as the NH50 exhaust so I guess you can cut the pipe or you can use the header from a sito plus or can make one it is a simple pipe with 2 90 degree bends.
- Tue May 26, 2015 10:57 am
- Forum: Performance Technical
- Topic: Anybody know anything about this Gianelli Pipe?
- Replies: 6
- Views: 4729
Re: Anybody know anything about this Gianelli Pipe?
If anyone is interested the guy seems to have more:
http://pages.ebay.com/link/?nav=item.vi ... 48&alt=web
http://pages.ebay.com/link/?nav=item.vi ... 48&alt=web
- Fri May 22, 2015 6:12 pm
- Forum: Performance Technical
- Topic: Anybody know anything about this Gianelli Pipe?
- Replies: 6
- Views: 4729
Anybody know anything about this Gianelli Pipe?
It is for the NH50. I bought it NOS in a clearance sale. Currently it is on a new to me Peugeot SC50 which is a NH50 Aero/LEAD clone. Good looking piece and hopefully better then the rusty OEM clone Sito it replaced.