Search found 16 matches
- Mon Dec 09, 2019 10:31 pm
- Forum: Performance Technical
- Topic: Not getting all the way on pipe
- Replies: 31
- Views: 27111
Re: Not getting all the way on pipe
i got a crappy set of old stock ebc brakes once. about at the same time i got the bike. they couldnt lock up the rear tire for me, didnt like stopping. I got a set of honda oem's and i think its the best drum braking you can have. i think it could do a front end stoppie or at least pretty good braki...
- Sun Nov 10, 2019 1:25 am
- Forum: Technical Help
- Topic: hello all im backkkk
- Replies: 29
- Views: 24267
Re: hello all im backkkk
Went to my son's place were my 94 elite is and play with the carb today the jet was 78 we up jetted to 82... I think the pin is the slow jet was bent I'm looking for one if some one has one and willing to sell it let me no.. Thanks for your time.. Swimmingfree taz sells slow jets on ebay for these,...
- Sat Oct 19, 2019 5:15 am
- Forum: Technical Help
- Topic: Putting carb back on 1989 Sb50p
- Replies: 2
- Views: 3409
Re: Putting carb back on 1989 Sb50p
from what i know maybe you can find a fiche parts diagram for a better picture but you have 3 main hoses. one is a vacuum line. and one is an oil line and the last is gas. the oil should come from right under the exhaust pipe connection to the cylinder. that goes to the side of the carb should be a ...
- Sat Oct 19, 2019 5:02 am
- Forum: Technical Help
- Topic: Met vs Ruck Wheels What’s the Difference?
- Replies: 4
- Views: 4224
Re: Met vs Ruck Wheels What’s the Difference?
Ruckus wheels are wider. Don't think a ruck will work and the met wheel would be tight. I would suggest a 94-01 elite sa50 wheel with met brake plate. The elite wheel is just slightly narrower than the met. Your still gonna have to modify the hub and re-shim to get it centered. i dont think the met...
- Thu Oct 03, 2019 7:31 pm
- Forum: Technical Help
- Topic: Painting rims/kicker
- Replies: 5
- Views: 3976
Re: Painting rims/kicker
does powder coat jobs, is that 1 coat, or with clearcoat over top of it? does it not run when gas is spilled over top of it? ive tried enamel paint on my rims and its chipping and du-pont acrylic lacquer and some anti-corrosion black paint on the kicker. rims have chipped, and the kicker rubs the pa...
- Wed Oct 02, 2019 11:50 pm
- Forum: Technical Help
- Topic: Painting rims/kicker
- Replies: 5
- Views: 3976
Painting rims/kicker
what kind of paint do you use for these parts? i tried enamel appliance paint for my rims, but now its chipping. And any suggestions for the kicker cover what kind of paint to use, I keep having when i drain my carb bowl the gas cleaning the paint off of it. I was thinking something like https://www...
- Thu Sep 26, 2019 2:17 pm
- Forum: Technical Help
- Topic: 1987 Honda Elite SE50 Derestricting
- Replies: 20
- Views: 13497
Re: 1987 Honda Elite SE50 Derestricting
maybe a new contra, do you know how to get the clutch apart to get to the contra? i use a bench vice to hold the nut and then a large oil filter remover to turn the clutch by the clutch pads. there are 3 contra springs i usually see, they call tem 1000,1500 and 2000. maybe 1000 for some extra tensio...
- Sat Sep 21, 2019 3:50 am
- Forum: Technical Help
- Topic: How do you get that oil pump plug working?
- Replies: 12
- Views: 7425
Re: How do you get that oil pump plug working?
Greetings: O-rings come in different thicknesses as well as diameters. Perhaps it was bad luck on the original, not "square" when you pushed it in, or a sharp edge on your crankcase. After that maybe replacements are too thick to fit? Measure the pump bore and the plug diameters. Lawn irr...
- Sat Sep 21, 2019 3:41 am
- Forum: Performance Technical
- Topic: Advise on building for acceleration
- Replies: 18
- Views: 16670
Re: Advise on building for acceleration
you can take off the rear cvt cover on your bike and see when the cvt switches gears. if it does it too early or too late you can put a camera there and see. larger like 1500 spring will make it take longer to upshift. lighter roller weights will also make it take longer to upshift, but you'll have ...
- Fri Jul 12, 2019 9:59 pm
- Forum: Technical Help
- Topic: Oil in Rear Clutch Casing?
- Replies: 3
- Views: 2919
Re: Oil in Rear Clutch Casing?
i would guess its some 10w-30 oil right? theres oil in, I think, the rear gears of the spree, and theres a fill/drain bolt at least is on an elite to fill it with. that oil is there to lube up the gears that attach from the rear clutch spindle, to the rear tire. theres an oil seal behind the rear cl...
- Fri Jul 12, 2019 8:55 pm
- Forum: Technical Help
- Topic: How do you get that oil pump plug working?
- Replies: 12
- Views: 7425
Re: How do you get that oil pump plug working?
i'm just posting in case others have a problem and they can't narrow it down. Mine split and I don't know how or what I could of done to of used this o-ring sealed plug. I tried installing mine 5 or 6 times and everytime it came out with the o-ring split. I'm just bringing it to attention of others ...
- Tue Jul 09, 2019 7:27 pm
- Forum: Technical Help
- Topic: How do you get that oil pump plug working?
- Replies: 12
- Views: 7425
Re: How do you get that oil pump plug working?
no my bike works now. after trying many things and replacing the carburetor and changing jets after replacing the pump plug back in with the oil pump, it works. the pump has an oring that sits on the top. thats just how orings work. and issues dont run deep they just run right there in front of you ...
- Tue Jul 09, 2019 3:33 am
- Forum: Technical Help
- Topic: How do you get that oil pump plug working?
- Replies: 12
- Views: 7425
- Tue Jul 09, 2019 12:35 am
- Forum: General Discussion
- Topic: High RPM Goals.
- Replies: 34
- Views: 20421
Re: High RPM Goals.
how did you disable the bystarter? its default off position is going to be choked.
- Mon Jul 08, 2019 11:59 pm
- Forum: Technical Help
- Topic: How do you get that oil pump plug working?
- Replies: 12
- Views: 7425
Re: How do you get that oil pump plug working?
hondabond, would blow out. its meant to be pressed/sandwiched together. its only the o-ring that seals. i dont know is his made different? i bought mine from the hawaain guys shop. i got some calipers maybe could measure. but it never worked, and the o-ring always split.