Honda Spree and Elite 50 Forums

Rather than "deleting" the oil tank, seems like I read that folks use it to carry oil for mixing at the pump. If you could run a line from the tank to an on/off valve that is easily accessible, then you could just carry your 4 oz measuring container and have plenty of oil whenever needed....

motormike wrote: ↑Mon Jan 04, 2021 1:14 pm The gasket is mostly to keep out water and dirt.
Some engines need the gasket for spacing of the starter pinion.
Not Spree though, iirc.

Thank you for the info!

Volvo850R wrote: ↑Mon Jan 04, 2021 12:07 pm I haven’t had a gasket on my belt cover case since i got my spree 5 years ago if that means anything to you

I sorta had the same thought, thank you for the info!

Can I use Honda bond? Can’t find a crankcase gasket after replacing my belt. Any help greatly appreciated.

Greetings: = Yes 4 oz per gallon is 128/4 or 32:1. Seems to be the consensus here but some prefer 40:1 or higher for less smoke. If you change the oil ratio significantly, you should consider jetting changes. More oil = less fuel = leaner, may need bigger jet. Less oil = more fuel = richer, may nee...

Greetings: Lots of pump deletes any time the owner of a variated AF05 or AF16 assembles a big-bore. The plug for the pump socket of those engines is available everywhere. I wasn't so sure there was a Spree-specific pump plug, or if the AF plug just also fits the Spree. The oil pump is generally rel...

motormike wrote: ↑Thu Dec 31, 2020 5:03 pm

Lazertits wrote: ↑Thu Dec 31, 2020 2:03 pm Total noob here, i have deleted my oil pump on my 86 Spree.

Why did you do that ?

From my understanding it’s pretty common to do the oil pump delete is it not?

Total noob here, i have deleted my oil pump on my 86 Spree. Do people also remove the oil reservoir as well? can it be removed? Just cap it and leave it? Thanks for any help.