Honda Spree and Elite 50 Forums

Strictly occasional cold start when ambient temp is below 72° for any period of time, otherwise not used . . . line goes to previous oil injection port on manifold I don't run any choke at all in summer Interesting, so you’re running premix and bypassing that oil injection completely? Couldn’t a ‘T...

So is the syringe and extra fuel line to send extra fuel for gard starts or to pull vacuum on the petcock to get fuel flowing to the carb on hard starts?

Can you elaborate on this? What exactly is it doing. Are you bypassing the auto bystarter somehow? Very curious

Does anyone know how many wires the headlight harness has? Trying to figure out how many connections a 25 watt halogen bulb should have to swap one.

noiseguy wrote: ↑Mon Oct 16, 2023 9:44 am
You can 100pct take a dremel with cutting wheel to the bulb, cut/smash out the internal bulb, and replace it with a 25W halogen or LED unit held in place with putty epoxy i.e. JB Weld.

I may try this on one just to see how it works.

@noiseguy - ok now Im getting it, you’re design eliminates the whole lens and everything. Would be cool if there was a way to use some cheap and readily available automotive light bulb in it for long term replacement. Idk much about the leds but wonder if there’s a market standard type of thing avai...

bonesv wrote: ↑Sun Oct 15, 2023 3:38 am Send this dude a message in his store on eBay...... https://www.ebay.com/str/alluneedscooterparts

Sent him a message, thanks will see what they say.

Which 3D printer do you use? I picked up a 3D printed petcock cover off someone awhile back and it was decent quality. Not like oem but still sufficient.

noiseguy wrote: ↑Thu Oct 12, 2023 9:01 am There used to be several vendors for these parts on eBay. Are they not there anymore?
One of the reasons I never bothered stocking cables was that they were pretty easy to buy from others.

Yeah I bought my last one off ebay but current searches turn up nothing.

@Rideslikenacho do you have a 3D printer? Or would you need to buy a 3D printed part? Unfortunately I do not have one or Id probably be coming up with a battery cover too and some other things. I’d be interested in buying one depending on the cost of course. It’s a great idea and really does need a...

Anyone have a good lead on a new rear brake cable for the Spree?

I’m looking to replace bulbs on several Sprees, gotta be a better way. 3d printed with video tutorial with steps would be excellent!

‘Suspect’ wires in image, also it looks corroded. Assuming this is causing grounding issues so no power is going through. If anyone knows the correct gauge of that wire would be great.

Only thing else I have noticed is bad green wiring (exposed wire) coming off negative battery terminal going back into wiring loom. Could this be it? Yes, that green wire is the main conductor for the grounding side of the system. Thanks, I’ll rewire those next. Aside from that, everything else on ...

Have an ‘85 Spree with no power getting to it. Battery is dead for sure so hooked jumpers up to my truck and would expect to see at the least rear light, blinkers, and horn plus starter engage but I get zero power to them. Checked the red wire to fuse, fuse, red wire from fuse to front, red wire fro...