Honda Spree and Elite 50 Forums

It has power now I realized there was a screwdriver melted into the exhaust that was there to hold a bungee cord away from it and that's why it was bogging, just didn't have enough exaust flow, still boggs though but nowhere near as much not sure if it has an airleak I'll do a leak down test when I ...

Thanks, I've went through a top end since then it was bogging because the piston circlip came off inside the engine anyways new top end now and it ran greats for like 10 miles untill I came on a stop sign and it died, it idles fine maybe even too low and bogs very bad when I give it any throttle I p...

Yes it is the stock carb, I just cleaned the carb out again ,float works fine, and I'm about too try it again, I don't have a new cdi yet but I'm gonna order one, I have 2 other coils that will work but I haven't tried them yet, that's what I'm doing next then I'll take it for a test soon, - update ...

Thanks, it has all of the power though untill it gets too around 34 mph and I meant it doesn't seem to be a vacuum issue sounds rich or like the or like it's not getting enough spark almost on the high rpms , could be the float but idk

I'm having the same problem, my bystarter is completely capped off and it's always ran fine and got up too about 45 mph but ever since I checked on my roller weights and my belt and put it all back together the same it refuses too go past 35 and just bogs if I try too go faster, I've also cleaned ou...

I'm trying to figure out why my honda aero 80 keeps bogging down at 3/4 throttle and max throttle. It ran fine before I took the cvt apart to check the belt and rollers. I didn't put the back plate on the front pulley, so maybe that's the issue. I checked the rollers again and they are fine and in p...