Honda Spree and Elite 50 Forums

[/quote]



Anyone have any recommendation on where to get the drivebelt cheaper than the dealer? Are Honda branded belts cheaper than the $40 the Kymco dealer wants?[/quote]

I think they are like 30 bucks but am not completely sure..maybe $34

You could try a product called cable lube. Maybe the best would just be to get a new throttle cable. yeah, I agree..if the cable is bent and not straight and such it would be best to just get a new cable. As for sludge I don't see why you couldn't get something to clean it out..I've seen some wicke...

Just follow the cable down to see if it is bent or twisted..It might have sludge on the inside of the cable causing it to get "stuck" too

My top speed is 38, I still have a restricted CDI The fastest I ever need to go on my commutes are two roads for about two miles each at 45mph but I can't do it yet. After that everything's 25-35mph speed limits. wait. Does your bike have stock gears? dude. Dump those and get some 8.44:1 gears. You...

Dac wrote:thats to thick. it will slow you down. allot of people put thicker s*** in there thinking its what belongs since its gears. how ever 10w30 or 10w40 is what you should put in there.

I talked to a guy at honda about it.

I concure [agree]

Besides the cold I enjoyed riding in the snow last night..since we didn't have enough to take out snowmobiles, I did the next best thing..the moped haha. Its pretty fun riding around on the grass doing some pretty good drifts :D I almost whipped out on a few occasions but I learned fast to not give ...

I wanted to drill out one baffle myself just to make the bike a bit louder but I couldn't reach any baffles..so how much louder did that one baffle make and what did it make it sound like?

I checked the plug and after however many miles the color is still pretty light..I'm not liking it..A week ago I adjusted the throttle needle and put it in the bottom notch I believe as with the cooler weather to richen it up some as I know the colder weather leans the mixture I am running the stand...

man i wonder if im doing it wrong or if im just running that lean. i did one chop. and it was white just as it was before i put it in. so i reoiled my air filter and moved the clip on the needle for the throttle down a notch. did another chop and its still the same. i only rode 2 blocks when i did ...

technically by removing the restrictor on the front clutch and drilling the exhaust your moped is still stock

wow, now that is in great condition.

So I'm thinking about doing this really bad now what speeds will I get with a 63cc and a 72 cc respectively? Just an average to help me decide upon which one I should get. Also about how long would this take? I'm thinking of taking it to a mechanic my dad is friends with and having him put in the bo...

Thankfully none of us are going to be diesel technicians..I hope so anyway lol

so you dont ride it around before you do the chop? you just put the plug in and go WOT ? if you were to ride it home after you did the plug chop without changing plugs would it ruin it? Since it'll be a new plug you can let it warm up and then take your WOT run and hit the killswitch/turn it off wi...

Take this test and see how mechanically inclinded you are:


http://www.forddoctorsdts.com/



and - if you are a mechanical engineer - be honest about what you scored!!!!





I got an 56%..... not good lol