Honda Spree and Elite 50 Forums

PM sent.

I'd buy another, if the price is right.

Yes, I specialize in Spree carburetors.
Floats adjusted, idle jet removal, sonic heated jewelers tank cleaning.
All carburetor work fully guaranteed for 30 days.
Miscellaneous carburetor parts available as well.

Glad we finally got the carburetor from leaking, Spreerider.

bradthree, I picked up a 85 Gyro and a parts gyro a few weeks ago.
Are you aware of any mods available for this?
I have a few extra new rear tires as well.

CharlotteSpreeRider,
I was wondering how the carb worked out that I sent you.
I benched checked the carb with liquid, to check for a good seal. It passed.
Let me know how it performs.

Thanks, greg

The only difference I've seen( several hundred) is some have a 68 main jet and some have a 65 main jet. They are interchangeable.

They are the same, 84 through 87.
I do have a rebuilt available if you need one.
30 day warranty: completely gone through correctly.
$89.95.

Pay pal welcome.

Let me know, greg

I offer a leak check tool that I fabricated. It fits in the spark plug hole and smoke is pushed in the motor via a tube, Slowly turn motor over by hand and plug the exhaust with finger. Smoke will appear at the leaking point: reeds, crank seals, carb, or manifold seals, head gaskets, bottom of jug, ...

I've seen many a carbs that someone used the longer mounting bolt that belongs on the inside, but used it on the outside and compressed the bolt into the by-starter area,
Smash! Stuck by-starter piston.
Be sure to use the right bolts, there are two different lengths.

You could put an impact wrench on the crank nut and spin it to start, but first remove the Bendix before attempting this.

I have 1984 cranks in stock.
Pm me please. greg

Thanks for the info.
It looks like a sweet bike.

May I ask, how much can you get one for and where?
Thanks

You may have a after market by-starter.
They don't fit very well.
A bad by-starter could cause hard cold starts.

Those will not work on the Spree's.