Honda Spree and Elite 50 Forums

2001 Honda Elite Hasnt been run in a few weeks. I took apart the front headlight and console so I could repaint it and clean it off. When I reassembled it all switches worked except the headlight and the left blinker. However When I unplugged them and put it together again I had no headlight and no ...

Like I said the electrical stuff seems to work if i jiggle the handle a bit. The horn will work faintly (battery is low after winter storage) but you can hear it honk. Its just as soon as I pull the handle back in it stops working again and I will have to re jiggle the handle to get it to work again.

So last fall I was riding and the moped abruptly died. After messing with it for a while today this is what Ive got. The oil light which is always on after plugging the oil pump only comes on when i jiggle the left break handle. When I pull the break handle in the light goes off and the electric no ...

I tried jiggling the key, slowing turn it on, turning it real hard nothing seemed to matter. any more ideas?

No lights anywhere. No brake lights, literally nothing works.

I fired up my moped went about .5 miles to get some gas. I filled her up and headed back home with no problems. I then left using the starter to turn the moped on and left. I headed about a mile down the road and everything just stopped working. The engine shut off, the starter wouldnt work, the tur...

Well the bore was the 50mm Ruima bore i bought from toboggan. It came with a thin base gasket so im assuming thats what it was meant to use. The threads on both ends are a little longer than the stock ones so its kind of hard to tell if they are all the way in. Is there a better way to tighten the s...

So I received my big bore kit in the mail. I noticed that it was missing the nuts that came with the kit so I figured I would just reuse the old bolts. I got it on but only 2 of the bolts actually would tighten down. So I tried the studs that came with the kit and they tighten in but I have no way o...

so basically I am correct by wiring both black/white wires together and running them up to the new ignition switch? If that is indeed the case the engine is still not functioning correctly. Could it possibly have something to do with the on off switch?>

I bought an elite and the wiring harness in the front was cut and the ignition was hooked up to a switch. I removed the switch and bought a new ignition. I now have all the wires hooked up but I cannot get it wired correctly. I have the 2 black/white stripe wires ran into one and hooked them all up ...

I was looking at buying this

http://www.alexwarehouse.com/taiwan-oko ... _p653.html

Im a little iffy about buying from them I was wondering if anyone on here has any experience with them?

no chance i can get in on this?

would the battery off my 01 elite work to start a 85 spree?

I went to change my rear brake since it wasnt grabbing well so i got the wheel off but noticed the cam was always was always slightly twisted causing the break to be slightly separated. I tried taking the adjusting nut off but it stayed in that position. Is this a hard fix? I would like a correctly ...

I was also sad when the contessa kits went up to 200 from 130.