Honda Spree and Elite 50 Forums

Here's mine I restored/finished last year about November/December or so link from moped army with some other pics of some bikes me and my brother had put together What pipe is that? http://www.mopedarmy.com/forums/discuss/read.php?f=1&i=824037&t=803378 http://i35.photobucket.com/albums/d156...

I have yellows and they are 3000rpm

I guess that athena kit is supposed to be badass. more power than polini/malossi. not as durable though

z50r-blank wrote:VERY good question; I had wondered about that, too.

Bakaracer, Arnadanoob or Mr. Wheelman should have our answer soon!

later, jon

Do you have a tach on yours?

As the topic says. Of course assuming that the carb is big enough and the pipe is built for that rpm.

no problem mr. wheelman. Your scooter is looking clean... best of luck keeping it together.

Wheelman-111 wrote:Greetings:

I couldn't find the thermocouple/wire on the Westach site. Thanks for the kind offer. PM sent.

Westach site...products...accessories... CHT Thermocouples

get a new thermocouple http://www.westach.com/

Also PM me your address and ill send you a 160 main if you like.

Im impressed you were able to hit 60mph with 9.1 gears and that pipe you must be doing somethin right

Greetings: Thanks, Baka. So you get all you need from a comparatively small 21mm OKO? I figured we were going overboard with those 28s (or a 30 in my case, but I got such a deal... :oops: ). Then again, I call VT and tell them Flash III's setup with a 24mm Mikuni and they insist I need a 28. :*: OK...

I think mr wheelman is so light on his weights cause of a taller gear ratio. there is no way i could do 32 grams with the 9:1s

with 9:1 gears im at 39 grams with a 1500 rear spring. IT revs pretty high. if i go to 42 grams its still good but doesnt take off as well. 40.5 grams i think would be perfect for my setup. though i may try the 2000 center spring. this is with a pg long as well

are you stacking gaskets or using a KN spacer?

Im sure Baka will chime in with some good info

for reference i have a 51mm ruima with and i didnt port the boost port either. goes good.