Honda Spree and Elite 50 Forums

Ahhh, ok.

Thanks for clearing that up guys. I'll have to do some measuring to see what I can fit on the back.

Thanks again for the help!

I did a quick search about tires that will fit on a spree and found someone looking for tires for an aero and a 90/90-10 tire was suggested. So will the 90/90-10 tires fit on a spree? If not what is the largest size tires that will fit on it with no modification? Sorry if this is a repost, I just wa...

Your throttle cylinder is stuck at almost WOT. It should be all the way down when you have the throttle closed. You should not be able to see the needle when closed. Check your throttle adjustment and also screw the throttle cable off of the top of the carb and make sure the cylinder is in the slot....

Roller bearings are surprisingly resiliant to oil starvation...but you will have to get the top end apart before you can tell. But you still may be lucky.

I was wondering if anyone knew or had an extra connecting rod around that they could measure the center-to-center length on.

I have done a search and have looked through the manual, but haven't come up with anything.

Please Help!

Thanks

ahhh, I see.

I think I'm going to do a little experiment!

Does anyone have an SB50 reed valve and inlet pipe that I could buy from them?

I have been lurking around the forums for a while. I bought a pair of disassembled sprees for $400. I am looking to make some performance mods to one of them and need some advise. I want to keep with the spree engine, looking for this to be more of a fun project. I have access to a full shop includi...