Honda Spree and Elite 50 Forums

Thanks for the input. I've tried no throttle, part throttle, WOT throtte. No luck. The electric starter will turn the engine over at the same speed. It would almost start. Usually the first or second kick will get it started. Any ideas? Thanks

Hi, My 86 Spreee will start with the electric starter everytime and it runs great. However, once it's been warmed up. It would only start with the kick starter. Any ideas what I should check? I have taken the carb apart and cleaned it. Thanks in advance.

What are the critical dimensions for the valve to fit? ie: thread size and pitch, etc.

Would the spree fuel valve work on an Aero 50? What other model's fuel valve are interchangeable with the aero 50's? thanks

I am looking for a replacement throttle cable for my 86 aero 50. Babbits has no stock. Does anyone know what other model has the same throttle cable? Or can I use a generic throttle cable? If so, what is the length? Thanks in advance

Thanks for all the input. I ended up buying a new carb and it runs go now. The previous owner did something to the brass tube for the pilot jet of the old carb and I think it is beyond repair.

Thanks again for the input. I have a few questions. Where is the pilot jet pinhole? Where is the bystarter insert (on the carb side or the bystarter side)? Thanks again.

Hi, I have taken the carb apart and cleaned it as described. It still won't idle. It would only start with my hand covered the carb. Once it started, it would run for a few seconds. I have check the timing and it is dead on. I did noticed that there is fuel running down on the outside for the thrott...

Just like what you said. Thanks

I am from Alberta, Canada. Thanks for all the input. I will take the carb apart this weekend. For the vaccum line, the previous owner has replaced the auto fuel valve with a pet * (ball valve). What is the function of the auto fuel valve and what is the impact of the current set up using a pet *? Th...

The lever itself

Hi, I just bought an 86 Aero 50 and I am looking for some input to guide me on track. Here is the deal. It would only start if I remove the air cleaner housing and cover the carb. Once it started, it would not stay idle. I have tried to adjust the mixture screw and idle speed screw with no success. ...

What is the procedure to remove and replace the left brake lever on a Spree? Thanks

Thanks for all the input. I am going to buy it.

Anyone has experience with the subject scooter? How is it compare to a 86 Honda Spree? thanks