Honda Spree and Elite 50 Forums

i will try 2 get some pics but i am in school right now.i made a stronger glove box out of sheet aluminum.(i did not have a glove box so u probably dont have to take this step)i mounted the sterio in the glove box and some cheap computer speakers outside of the glove box.be warned place the speakers...

believ it or not a chain does stretch. thats why there is always an adjustment on a dirtbike

the problem with a spree is it has no low end torque. stay away from loose dirt.

u cant use a dead batt because the alt only charges at a certain speed. my advice is wire it into the headlight. the only problem with that is after u shut the bike off u lose all of ur pre-sets

the buttons to activate the starter are in the brake handles. pull the brake handle anyway and while u are still holding it in hit the button.

no sanding that is what the paint is made for

it will work. i suggest it is not the top of the line.if it gets wet its screwed.

i think fusion has that color but im not sure. the only prep is to wipe the body down with acetone to remove any wax or grease that might be on it.be warned the acetone will take the paint off side panels!fusion is specifically made for plastics.

lol, yes.

ok this is gonna sound stupid and im sure you did it but, is the kill switch on? and also try taking off the gas cap and try to start it without it. if it starts the cap isnt venting.

i have a 60 gallon compressor and a spray system too, but i would reccomend the fusion. its cheap, made for that, and i think car paint (if thats what you plan on using) will melt plastic.

ebay

it works well but i suggest a new batt.

possably the clutch. or bearings.

contact paul he will have all the parts you need cheap.