Honda Spree and Elite 50 Forums

I agree about the reeds. If one or both is stuck open, nothing will happen. Also make sure to check the gaskets.

36. I noticed Alow1 is from Clinton, Iowa. That's where I was born, still have relatives in Savanna and Thompson.

That same day I picked up a can of Permatex spray Gasket Remover. Liberally soaked the parts until the next morning. Used a chisel and a five-in-one tool to remove most of the gaskets, another quick spray followed by a cleaning with small brass bristle brush and toothbrush. Rinse in water, dry. Work...

Thanks!

Anyone have any quick tips for softening intake gaskets at the reeds and oil pump for simple removal? Beside careful scraping with a chisel or razorblade?

This has been covered a little in bits and pieces throughout the forums, so I figured I would condense that knowledge here. If your completely stuck, and have already cleaned, tested and gone through every aspect of spark, ohms, and carb cleaning, CHECK YOUR REEDS! I tore apart and cleaned my carb 5...