Honda Spree and Elite 50 Forums

As for the cables everything reaches fine. Except the rear brake cable, But my cable has been broke for quite some time(like 1500 miles). I have the elite front wheel and brakes so thats all i need it makes things more interesting. O yea the pipe is pretty lond. Lets just say I don't drive around th...

I'm still working on the gy6 150 spree swap

yea those pics suck here are some new pics i streched it another 3''.

I figured out how to get the elite front wheel and brake on the spree.

I'm about to get some pics I'll put them in the "wheel and tire size" thread in the general disscusion

II'm working on a build right now putting a gy6 150cc on a spree. Can anyone say 90mph.

ok so I was given a 87 elite parts bike and I decided to try out the elite front wheel and brake assembely on my spree. So to get it all to mount up properly you must cut just over 1/4 inch off the elite hub to get it down to the width of the spree hub. Then you use the spree wheel spacer plus 1/4 i...

So me and my buddy were sitting around bored last night and we decided to wrench on the spree. So I removed the motor and motor mount. I took the motor mount and extended it 2.5'' and shave some of the frame so I would all fit together. Everything bolted right up no problems. The bike sits an inch o...

I'm running a ruckus shock on my spree with 3''x10'' tires. You have to move your shock mount point to under the oil tank. But I did it with no welding. I also just streched the spree by making the motor mount a little longer and bolting it to were the center stand would mount. (with 3'' tires the c...

I think i need an impact wrench cause I cant get the clutch or rear wheel off

So I need some help. I was ridding my spree today and came to a stop sign and my bike died. So I try to restart it and the starter propelled my bike forward and it ran fine until I stoped and it died again. So I pulled apart the side cover and removed the belt. The clutch will not disengage at all. ...

hey ae86guy what kind of clutch springs are you using?

I'm running pretty much the same setup on my spree but with a pully mod and wider belt. It hits 44mph but bottom end sucks. I need new clutch springs.

I had the same problem when I put 3.00'' tires on the spree.
I just removed the center stand and used a aluminum bike side stand and it works great

You may need to trim you rear fender some I did on my spree when I went to the 3.0'' tire

I have honda ruckus rear shock with the mounting point moved up by the oil tank.

I didn't have to but I rides way nicer

Ok I built one, It's not real pretty but it only cost about $15 for the parts.

It helps mid range to top end alot