Honda Spree and Elite 50 Forums

I too have found a similar site
http://www.scooterfinds.com/
Good luck in searching

Thanks for the wishes, but all hopes are lost called the guy before i got off work and he had just sold it.
The search continues.

If the guy has not sold it by the time i get off work tomorow , ill be bookin it to east stl
wish me luck

Dont need a title to ride in Mizzery
Just want to have a beast of a scooter

http://stlouis.craigslist.org/mcy/1819589296.html

I live in KC, it would take me about 3 hours to get to STL.
Would it be a good deal?

Replaced the main with a #84 i had and it solved the problem, can now reach the 35 mark on the speedo, but a new thing is happening. When i try to exceed that mark it backfires and looses power.
thoughts or suggestions...
thanks
MIke

i got a #95 with my kit, but im goin to try out an 80 something i have laying around, I did however tape up about half of my intake and it did cruse up to "30" Thanks for the advice ae86guy, you saved me from making another thread.
MIke

ok ill try the tape and i think i have a larger jet i can try
thanks
MIke

http://www.sears.com/shc/s/p_10153_1260 ... blockType=

This is the air filter attached to the tube from the carb to the box.
I have the 44mm bbk kit on it
There is a #74 main in the carb

Spree is doin good except when i hit "25 mph". Its revving up real good up until then and then it just looses powah and boggs out. I have played around with the carb, seeing if it is a tuning issue, but i cannot find out what is wrong.
Thank you all for your help.
MIke

Checked my compression today, and it was averaging around 135 psi.
Sooo... i started to reclean everything
still no go
decided to change back to my origional spark plug and boom!
Solved the problem
Thank you NGK

I like Armor All for my interior and tires

your second answer is what i was looking for, ill have to check them
thanks

I have fuel and spark, so it is probably the compression. I dont know currently what the comperssion is but im getting a tester tomorow. What and where should i look for if there is low compression?
Thanks
Mike

There is a small gap between jug flange and exhaust flange, to seal it, could I put some hi temp gasket maker in there? somewhere i saw a thread about this, does anyone have any experience?\

/thanks, MIke