Honda Spree and Elite 50 Forums

From Jerry: ------------------- When a spree has been stored for a long period the vacuum shutoff valve usually sticks shut and will not allow fuel to flow even under vacuum. ive fixed this problem a bazillion times. heres how.... just dont rush..... drain fuel from tank. siphon or whatever. remove ...

From Jerry: ------------------ 1. remove air tube from air cleaner box. usually just a small metal ring held on by a phillips screw. push back out of the way. 2. remove fuel inlet hose at carb. factory is red fabric covered rubber tube. if the end is cracked or deteriorated replace. i recommend surg...

I am starting through these mods on my scooter. first off, the inner pulley needs .030" taken off the inside, not 1/16". any more than that and you will be running the belt outside the pulley. as for the head, it looks like you could take a max of .030" off the head before you lose mi...

Edit: Numbers listed below are wrong. Ideas might be on the right track. Read on. All, found these on another board. never personally tried them, but here they are. the jetting change, notably, is going to need to be done in conjunction with the manifold and filter change, and probably exhaust as w...

All, Welcome to the new home of the Honda Spree board. The board is dedicated to the Honda Spree. I had no idea how much interest there was in this old scoot. The current site, even though it isn't that great, received over 500 posts in 1 month, and over 1000 over the last 9. We'll see how it goes. ...