Honda Spree and Elite 50 Forums

I fnoud a set of gy6 bushes for 5 bucks and wondering if they would fit before purchase. I ffigured i could pop out the inner part where the bolt goes and just swap that and use large flat washers on each side to hold it all together

I would.rather just change the bushing instead of cutting aand welding another mount

Anyone know the dimensions of the bushings? Put an se50 motor on my spree with sa50 mount and of course the bolt is too big don't have it in front of me and trying to hunt a solution down

I guess that's possible. Also u think a partially clogged expansion chamber would cause the same problem? I pulled it off and beat some rust out and it ran fine 30mph on the flat. Some smoke still came out the breather hose at wot

After about 5 mile run it started losing power and I got it home crawling I noticed when I tried to rev it out smoke comes out the crank case breather hose. Any suggestions?

Scrapptdogscooters.com sells a China cloned petcock that should fit. You want the smaller thread one

Just curious does anyone know if the gyro s oil pump ratio is the same as the se50? My gyro oil pump doesn't shut all the way causing the throttle not to return all the way to idle. Haven't pulled it yet just trying to get some ideas

I'm going to the junkyard tomorrow I know they have an aero 80 I can check on that cable for you. How much u wanna spend?

Evaporust at AutoZone is awesome for 7 bucks, swish it around fir a couple days and u should be good. If just one flake I wouldn't worry about it myself swish some gas, pour it out, and get on with business. An inline fuel filter woulnt hurt I don't guess

Post of picture of the entire bike since ur in Canada might just be a regular dio though the af35 vin should be a live zx but Honda was weird

Honda live dio zx

Yea thanks motormike, may have to go with the 130/90-6 from monster scooters

Got the rear fender painted and the rear rims done. Now I gotta do the front rim this weekend. Most of the restoration is done for the time being. Gotta find or make decals. Running down some rear tires and some missing pieces I need, may start and WTB thread

Got the oil and gas tank done with new hose. Put the backplate on and installed battery. I put some oil in the gas just to help the first run and to make sure it got oil till the pump filled the line. Got all the plastic painted satin black krylon plastic paint just like the motor fairring. Put some...

For real deuce, the thing about a swap is not an af16 but a gyro x motor or any like the canopy or Up. I think all of them have a variated motor With enough golds to ship from Japan I would do it cause they made those up until recently so plenty of aftermarket I'm sure