Honda Spree and Elite 50 Forums

Hi all, Kyle (paulpauly7) has my NH80 lead apart to wave his magic wand over. Things we will be doing: Boyseen power reeds. Up jet to #90. New brake shoes front and rear. New spark plug. New rear shock absorber. A good go through and service. The real problem: The rollers are flat. Stock is 18mm dia...

I see you're in NZ. Check these out from Scootling. You may want to have a quick measure up of your bushes to make sure they look like that are going to fit. They appear to be OEM so you cant go to wrong. I've bought some my Af18e 125cc stroker but haven't installed them yet. http://www.scootling.co...

Now we are talking.

Af18e large crank bearing part number ( 2x required) OEM# 91005-GW0-023 Size 20mm ID x 52mm OD x 12mm Wide. Alternative number from the NTN bearing on my crank. NTN# SC04827CS28PX2 OEM Oil Seals : Large seal for pulley side of crank OEM# 91202-GAH-721 Size: 19.4mm ID x 31mm OD Small seal for magneto...

Hi all, My ZX dio that has a cast Malossi 72cc kit on it has done the crankshaft bearings. What are the factory Honda part numbers for the bearings and oil seals (big bearing crankshaft)? Does anyone have any alternative numbers. We have quite a few bearing suppliers here so I can get hold of good q...

Are there any or the same clearance issues on a ZX Dio?

I also use red, 1" wide highly reflective tape made by 3M. One stripe below my licence plate and a stripe on my helmet. That makes me seen from behind really effectively. I also practice whats called defensive driving here in NZ. ie. slowing down a bit coming up to major intersections and scann...

That looks great Whitey but can I just ask about the sandblasting of the case halves. From what I have heard and read it is not advised to blast the cases. The casting is porous and absorbs the glass or sand bead. When the cases heat up and expand the absorbed bead is released into your cases and wo...

Love that white aero 50. My birthday is in May. May 2016 calendar photo for the win.

I'm posting these pictures on behalf of Paulpauly7.

Believe me when I say this scoot is his pride and joy.....and it does burnouts too.

That is the coolest nifty fifty, spree, eve I have ever seen. Can you please post some more pictures of it front, back, sides and handle bar setup. Also can you post a picture of your shock mount area? What size stretch is that?

Ounce again that is a very nice scoot,

And another.

Here are some pictures from Paulpauly7.

Hi. I cant really answer all of your questions but will answer a few.bI just bought a NH80 here in NZ (JDM model). I cant compare with a 50 as I have no experience with them. Mine does a solid 75kph on the flat with a 110kg man on it. It climbed to the top of a very steep pass 971 m (3,186 ft) no tr...

I am using the standard master cylinder that comes with the ZX. I believe they are all the same for the Dios. I have been mixing and matching between AF28 and AF34(late model dio with horizontal motor). On the back of the master cyl it has a set of numbers that give piston size and stroke etc I thin...