Honda Spree and Elite 50 Forums

haha funny...those motors are hard to come by these days, I had to pay $300 for a stock s motor.

well, will anyone attempt to slap a sa50 elite S motor into a spree? would be cool to see one built. Im kinda thinking of building a street friendly bike for my next spree project: Heres what I got so far for the sa50 elite motor that im gonna slap onto my next spree: Polini 72cc Corsa Bore (Factory...

good point, its difficult to stop at those high speeds (60-100), Ive talked to some guy in japan about disk brakes conversion and it is possible, those are my next mod on the bike. As far as speed is concerned its scary to go 60 on a spree, I just built this bike for the * of it

heres another example of a Spree with a Elite S motor, I dont know the guy but hes from where Im from (Hawaii). its also a stroker and is for sale but expensive (click on link below)

http://www.islandpreviews.com/main/modu ... d_id=32100

if your using the original reed valve since the beginning life of the ped, you should definately get a new replacement and about the carb cleaning thing :D a clean carb looks and performs better than a dirty one, and about the low compression, if its not the cylinder, piston, head, head gasket, cran...

check the reed valve, it may be faulty and rebuild and clean out the carb

its a good Idea to always use a new base gasket and head gasket all the time when rebuilding. I also use the products below, Gasket remover to take all the gummy stuff left prior to rebuilding and I lightly spray each gasket on both sides with copper spray gasket high temp to make sure no leaks. tor...

has anyone else attempted to swap or thinking of swapping engines? Im planning one building a drag style spree with a stretched style dio motor, Im thinking of a stroker motor but watercooled, possibly a 54mm watercooled cylinder kit and a 54mm Her II stroker crank putting out 124cc, its in developm...

My advice to you all is to first try to fit a dio (94-01 elite S SA50) motor first on the spree. I Can put up some pics on how to start because Im planning on building another beast Spree Dio, Once you have it on the frame and aligned you can do the first stage of modification and thats to get a hig...

I live in hawaii and and theres a multitude of shops that modify mopeds mainly the 1994-2001 Honda Elite S which has a dio motor and Jog. As for my Honda Spree, The Entire block is a 2001 honda Elite S motor (Dio) Keep in mind that honda released this motor from 94-2001 and is the most sought after ...

Hey guys heres my spree heres the specs: 51mm Round stroker cylinder (Exhaust port, and transfer ports ported) 51mm Stroker Crank crankcase (Block) has been ported (Boost port and intake port) and machined to fit the oversized counter weight on the stroker crank Double reed manifold intake 28mm Oko ...