Honda Spree and Elite 50 Forums

so where can i buy one?

well its all figured out. The aero stator seems to be working fine, and the spree cdi on the aero. So they seem to be interchangable. We had a really dumb mistake, the problem was that both are missing the ignition lock so we had all 3 wires tied together but the black/white is the kill and its not ...

well its all figured out. The aero stator seems to be working fine, and the spree cdi on the aero. So they seem to be interchangable. We had a really dumb mistake, the problem was that both are missing the ignition lock so we had all 3 wires tied together but the black/white is the kill and its not ...

alright, so i thought they were the same but i guess they may not be. My brother just bought an aero, and my stator is off his aero, service manual for the sprees says it should be between 750-1200 and the areo says 600-1000 so that means its not the same stator? His doesn't have spark, and we think...

ok, so i replaced the stator, and it gives a spark just every once in a while, mainly when you first hit the starter. The new stator gives me 690 ohms and the manual says it should be between 750-1200. It seems like if its not a short or open circuit it should work, right? i'll have a ton of replace...

does it make any difference? How much does it cost?

did you rejet the carb?

Does anyone make a bigger piston for the spree? Id like to bore mine but i can't find any information on it. thanks -Jimmy

you just need to take the gloss off. i used scotchbrite pads, but i think some 220 sand paper would work better. After its all sanded. whipe it down with some rubbing alcohol and a roll of paper towls. Then directly before you paint, rub it down with some tack cloths. They are sticky mesh "clot...

well i downloaded the service manual. I tested the resistance on the cdi plug, and found the "alternator exciter coil" to get an open reading. So i guess i need a new stator. anyone have one for sale? for future people searching. Pull the cdi out of its plastic holder, its on the right sid...

it has no turn signals no brake light, stuff like that. I think Everything that could possibly be in it for the ignition system is there. I have all the right handle bar controls coming, But i really don't think it will help. Im pretty sure the kill switch just grounds it out, so you will have no sp...

the headlight isn't completly bright, Does this mean the stator is the problem? We cleaned the crap out of it and the magneto

i just sprayed mine, you can buy plastic adhesive promoter at a paint store. i bought a rattle can of it for $20 then sprayed it with sealer, sprayed orange paint with a spray gun then clear coated it. I still have to wet sand the clear coat and put the bike back together. But first i have to get my...

bought a second spree and trying to get it to spark. Been pulling parts off the good spree and no luck. Coil and spark plug are off the good one, no luck. Tried cleaning magneto and stator, no luck. tried pulser off good spree. The old one was one wire hook up, the new one has two wire hook up, so i...